Search results

Richard a lot of older boats used fiberglass tanks that fell victim to ethanol. not sure what kind of coating you are referring to. Lloyd

i have plastic with a bladder. the problem is the off gas that is they develop a gas odor that ends up in the cockpit. i like the idea of the aluminum tank but i would like to see an internal bladder LLoyd

what do you plan for safety against side impact. I have been thinking of replacing my plastic tanks. nice welds on the tanks LG

pull the covers off see if its been stored with oil in it. if not they can rust up pretty bad LLoyd

49 amps draw pretty hefty That's going to really tax an alternator

https://www.streetrodhq.com/detail/42421/Air_Conditioning_Compressor_12v_Electric_.html Try this link for electric compressor

Thanks Terry So your recommendation is drain the system and refill using the tool. I have air bleeder on the top of the radiator. Bleed air off the radiator after the fill LLoyd

seal the collector connection to the muffler. I useed muffler cement liberal coating put the muffler back on wiped the excess car runs so much better. I too had the 02 sensor in the collector. Make sure your sensor is pointing down. I tried to put the senor under so you wouldn't see it...

Question does the system have to be drained to utilize. If not how does it draw out a bubble in the full system. The car on occaision has temps apporaching 210 in traffic and a/c on. I question whether the system is bubble free. will the system eventually absorb any air LLoyd

Re: 1965 ERA Ford GT40 #2066 Got to be lower serial than 2077 i have 2076 its stainless monocoque LLoyd

Howard brilliant two 5 are easier to tuck away than 1 ten Lloyd

tank size 5lb or 10lb usually i go with the bigger the better physical size is a big factor so from experience is the 5lb adequate or do we with the bigger the better and get the shoe horn out stuff the bigger tank in any brand recommendations Lloyd

I've replaced 3rd brakelight pressure switch ECHlin sl147. The issue is LED bulbs I started have problems once i changed over to LED bulb. I've been told the switch is good for 2-3 amps. I would think an an incandescent bulb would draw more amperage than an LED BUlb I found a break...

now that's cool right click translate to english. question is it available and how much

MSD Ignition 8578 - MSD Pro-Billet Distributors 351W ford engine i'm running Inglese 8 stack ez efi it it really tight between the distributor plug wire and the inner fuel rails. its so tight i can't use the MSD top that holds the plug wires into the cap. there is one in particular that i...

I had Moveable pedals and steering wheel in my ERA and had them remove it. the steering wheel and pedal assembly moved as one unit. the problem too much play in the steering. It left me with an uncomfortable feeling int he steering wheel. Had them remove it it and go with fixed mounted...

red dot makes what i was looking for trinary switch rd-5-4583-op connects to an r12 schrader port LLoyd

The problem is I just paid 200.00 to charge the system. There currently is a Schader connection to be able to remove the exiting high pressure switch from a pressurized system. So I'm confused do I need a binary or trinary switch to shut off compressor for low pressure and turn a fan on for...

Anyone have a source for a binary a/c pressure switch connect via schrader valve. i want to replace the single high pressure turn on fan to a dual function that shuts power to the clutch on the compressor low pressure and turns on the fan high pressure LLoyd

Word of caution on the oxygen sensor mount it where it faces down. I went with facing up trying to hide the big ugly thing sticking out of the snakes. Big mistake. it failed and started sending lean conditions to the computer pouring huge amounts of gas to compensate. barely made it home...