Search results

A teenage girl came home from school and asks her mother, "Is it true what Rita just told me?" "What's that?" asks her mother. "That babies come out of the same place where boys put their penises?" said her daughter. "Yes it is dear!" replies her mother, pleased that the subject had finally come...

Clive, my email adcoteng at pnc.com.au I believe I know where the moulds may be located

Clive do you have any further info ie names etc , a KVA kit went thru several peoples hands here in sydney, it was copied by a few. I may know where the moulds are

I made something similar to what you are proposing however I spun them in a lathe and used a wooden spoon lubricated with thread cutting lubricant "trefolex" in an aerosol can. they are "egg shell thin" so be patient

over centre the diaphragm in the clutch will not be good for it

for some time now , full cage roll bars have been a no no or in the least difficult to certify. half cage behind driver no problem generally. the cop cannot direct removal, they can say have it certified for road use. best way is to have the front half removable so it can be installed for...

my Dad was a harmonica player , had about a dozen of them in different sizes and keys and for sure that fellow at carnegie hall is an excellent player

You can redrill the driven worm wheel to alter the stroke of the driven cable and hence the sweep angle. The wheel boxes that the wiper arm fits onto is also available with different dia gears , also affecting the sweep angle. I seem to recall that I used landrover ser 2 motor , cable and...

Rivets are not the problem, it is holding in the pirelli webbing. I would suggest that pop rivets are not the way to go as it "squeezes" the pirelli webbing. Bifurcated rivets with a back up washer would probably be the original method employed.. However, I made a continuous loop and stiched...

Iain, are the fresh air vents on the outboard ends of the dash functional. Originally they picked up copious quantities of air from the two NACA ducts each side of the radiator air outlet. You could also try a helicopter vent in the side windows.

FC, only if the pinion bearing is taking the thrust. In a ZF the pinion bearing is a parallel roller bearing and thrust is taken by a ball bearing in the rear cover. ZFQ appears to be similar http://www.lotus30.com/Resources/Articles/ZF_Manual/ZF-5-DS25-Manual.pdf

both thinking along the same lines not saying the same thing. -:) speed quest has a good idea also

The cover has failed in tension at a vertical plane level with the spot face, making the boss longer will just move the plane further rearward. Needs thicker casting and or more ribs to provide a larger area to resist the tensile load induced by pinion thrust.

weifang far north and cold winter now. Have been to penglai and qingdao - very close to you

hillclimb competitors use a similar product as "tyre softeners", also go karters, although I believe now banned in go karting. dont know about this brand product, have used a product called "AZNU" (??) many years ago and it did improve the grip level if you put it on about a week before the...

David, understood, same scenario here, however, some structures just "appear" -:)

(all concrete cracks eventually) a properly designed concrete slab will not crack, you may get surface "checks" but that is not a crack. yes he does need to consider engineering pressure loads, the foam underlay is the insular barrier and if it is not specified correctly the foam will collapse...

You need to consult a civil/structural Engineer. There are many factors to be taken into account-- The rating of the foam is related to the mass of the slab and the loading that will be applied plus the ground pressure rating beneath the foam. 6" is one hell of a slab for a garage - do you...

FC, I travel there monthly and new contacts are handy -:)

where are you in china