Search results

Bill, I have and still use two moving dolly's from home depot (20 bucks a piece and you can use them move furniture when you are done). They work good to move the car around the garage. I have the frame sitting on the dolly in the front and rear (car sits at 5" off the ground), but I have...

John, Peterson fluids has a crank drive gear setups see the following link: Peterson Fluid Systems : Spline Drive Kits

Russ, I got a sump from them, it was a custom 4 pickup that was cast a little deeper to accommodate my 401 ci Windsor. It fits like a glove, sorry to here of your problem, it took them like twice as long as they said but when it got here I was happy. I sanded and sanded and sanded, to get...

TRT Project Delayed... Well, I have some unforeseen problems that will cause me to slow down on the development of this product. I had a heart attach on June 10th, I am fine, just a big eye opener. It is a two hereditary conditions that are causing the problem, one is a vain feeding the heart...

Mark, The smaller gear is just getting to small to transfer the power (thats why its states limited horsepower). But why would you need to have the effective rear ratio less than .238 or greater than .721 anyway? And no they don't fit, this is do to the fact that I sized the case for the...

ron, if you click, the first picture to show up is the one listed on the main page same poster and date

Ron, Here is all the sections and the last post: GT40 Photos - Real or Replica Put photos of your GT40 here! In even more bits Posted By David Morton 03-03-07 11:18 PM Untitled Posted By kenshiro8 03-16-07 02:13 PM 191 19 Historic, Competition, Racing Put your historic...

Ron, The first one on the list is: Gauges, RCR Posted By CESLAW 03-14-07 11:45 AM Gauges for RCR GT-40, March 2007 nothing newer

Wanni, Thanks for the clarification. The diameter of the drum is 1.625 " or 41.275 mm. DBLDREW, Thanks, that looks like the setup to use. They strightened out the helical gears while still keeping the noise down but adding strength. Yes, same layout for the quick change gears, but...

Wanni, Not sure what you are asking: which diameter has the drum?? is it the same for synchronised version as well?? Could you please rephrase so I don't answer incorrectly. DBLDREW, Jerico, no. planing on using the gears form a tremec or richmond box? T56, TKO 600, Richmond...

What's the shafts center distance? The shaft centers are 3.375" or 85.725 mm and the gears are over 1.25 inches wide. Which modules and pressure angles are you using? I'm not sure although I could find out if you would like to know. The input shaft and gears, output shaft and gears and...

Ron, The pictures are linked to the original site (no copywrite problems). GT40's is not hosting the pictures but GD.

Pat, follow the link in the post above to see additional info. The price is 2295.00 for the mini diff and 280.00 for the coupler.

Fran, Not to take this thread off track, but I think this setup could be used. Jim N. The problem with going with a motorcycle package is there is no reverse. Although you can use a product similar to this one (the inboard brakes are just a option). When I talked to them about a year...

Here's a couple of old pictures of my engine. 401 RDI block, Yates head, Kinsler Fuel.

I know RF had a few mod motor GT40s, but i don't know what gear box they used.

PM sent with the numbers you requested

The carbs on my shifter Karts (125 and 80) are of the slide type as are most carbs on motorcycles (at least they were). One thing I can say is that this is not a on/off setup at all.

domtoni, First off I would say thanks for taking this on. I think three critical dimensions are missing (overall length and the output shaft centerline distance) with adapter plate or bell housing and input to output center distances. The G50's looks long compared to the ZF but the G50...

Well, Yes it is time for a update. Things are progressing well but not as fast as I would like. Here is what parts are complete (shift forks, shift drum assembly, selector rack assembly, output shaft assembly, custom differential). Case designs should go to the casting facility Thursday or...