Search results

That's amazing that your having problems, these are usually extremely trouble free from my experiences. Just out of curiosity are these aftermarket starters or OEM starters? Jim

Bill, On the starter, switch to a late model starter with the solenoid on the starter. These are permanent magnet starters and have more torque and from my experience have less problems. They are also smaller and sometimes fit into tight spots easier. If you don't want to get rid of your...

Happy Birthday Fran.

Tom, Thanks for posting the Guard Transmission link very good info rockonsmile

You couldn't pay me enough to ride in a car with that crappy of welds. Hell you might as well Duct tape the tubes together. Very Scary.

Al, Thank you so much for sharing I couldn't stop smiling as I read on. I've been to Wright-Patterson a few times and had the privilege to stand in awe looking at both the SR71 and the XB70 Valkyrie, both sit side by side and are awesome aircraft. There is a YF-12A Interceptor in a separate...

I believe Renegade Hybrid and Powerhaus can do the machining needed to flip the ring gear within the case if you really feel that you can't flip the trans itself. There are more trans shops that can do this I just can't recal the names off the top of my head.

I would agree with Jac Mac. One other thing is the ring and pinion is designed to take load on the load side of the teeth not on the coast side. I think I would flip the ring gear and differential instead of reversing the engine rotation. Good luck at what ever you decide.

S Steve, I don't happen to have a jpg file handy, and I'm not really sure what good it would do you to have a picture. Andy just posted one if this helps. I don't have a drawing of this because I simply put the cast iron housing on a CMM (coordinate measuring machine) and got the data I...

Andy, Jim Dinner came up with this idea and he was using plain old 1/4" hot rolled flat stock. He's had great success. His plates were made using hole saws and drills bits, nothing extravagant. If your concerned check your flatness on a surface plate using a dial indicator. The thickness can...

Wow Fran I hope I didn't bring that over with me from Grand Ledge. I feel fine so I guess it's from your neck of the woods :-) Get well. Wiskey, lemon juice, honey :) lemon juice and honey can be substituted with wiskey :-) Take care:)

Well, I tried, but it didn't work so I sent a copy to Ron and maybe he can get it to work. :)

Guys, do to the fact that I have received alot of PMs requesting this model, I am going to try to attach it to this reply. Here goes.

If you have the Audi 016 transaxle and your trying to put the porsche 944Turbo ring and pinion into it: the pinion shaft is 4mm longer on the Porsche than on the Audi. This length difference occurs between 4th gear and 3rd gear. So you need to build a 4mm spacer plate to go in between the cast...

Guy's, If your interested I have an .igs 3D model that I designed based on Jim Dinners work. I used a CMM to measure the rear section of the Audi 016 trans then build the model based on those dimensions. I used this model to CNC machine my own plate. I can not offer the machining services...

Since Russ resurrected this I thought I would just mention that Caterpillar heavy equipment company uses Baking Soda blast to clean there engine parts in there engine remanufacturing department. When the soda mixes with oil residue it turns into a soap by product. They simply blow the parts...

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" UNSELECTABLE="on" width="100%"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">Randy, Could you weld threaded bungs...

Martin, Out of curiosity, where did the clutch disk come from in order to get the proper spline for the 930??? Thanks in advance :)

I just wanted to wish you all a Merry Christmas and Happy New year. I've enjoyed reading all of the new threads and the progress on all of the builds. Thanks for sharing. I hope you all have a wonderful holiday with your families. Take care.

Congrates Bill, I have three boys. 6, 3 and 14 months. I guess God didn't think my wife and I could handle a girl :) He's probably right :) Saver the time it seems to go by quick. Good luck with the sleep depervation. :D