Search results

Hi Shadster, If you want a crazy spyder all ready to go & road legal look at Race Cars www.pistonheads.com/sales/1031361.htm

This is my solution to the noise at race circuits, 96DB static @ 4500rpm 0.5 m distance away at 45 degree even increases the HP

Croft circuit 4th May 105 Db Cadwell park 105Db 20th April I have a pair of aero SLR mufflers you can borrow to bolt onto the back these do loose 4Db with no loss of power 13" long fits onto 3" pipes, you are quite welcolme to share my garage if those dates are of any use to you? you can...

Hi Mathew, Do you know what DB you are reading say at 2/3rd throttle? noise is a big problem on the UK tracks. 105db being a noisy day. I have been turned away a few times as I could not get the sound down enough.

Hi, Can anyone advise me where I can get hold of a 6 speed gear gate to fit over my gear leaver to enable me to make more possertive gear changes? i have seen some fitted to a few GT40s If I cant buy on looks like a manufacturing job. regards Steve

Hi Tom, I just want the gate that fits over the gear leaver they are raised up about 2" to allow the selection of gears in the gate. hope that helps Steve

Hi, Can any one put me in the right direction for purchasing a 6 speed gear selector gate that i have seen fitted to some of your Gt40s. I am running a inverted g50 6 speed Gt2 box mated to a LS7 engine. I want to fit the gear selector to make more possertive gear selection. 3rd & 5th can...

looking forward to doing some testing, should be interesting to compare the difference in engines though.

The engine has been modified slightly to a good race spec. remapped on the Dyno to suit the new cam. the results from the dyno are attached Steve

SORRY ABOUT THE ADDRESS www.knightracingservices.co.uk a very helpfull knowlageble guy. regards steve

New Engine, fresh of the dyno, ready to install. Engine builder peter knight. of www.knightracing.com looking forward to trying this spec engine out.

hi craig, no doubt you will have made your choice by now, but if it helps I am running a standard G50 6 speed GT2 gearbox mated to a race spec LS7 695HP & 630lb of torque Kinsler stack. Traction control via the right foot. not practicle on the road too fast is a understatement. On the track...

Hi, Can any one give advise on adding a rear spoiler to a t70 spyder. Will it aid rear down force? allowing the car to corner faster?. Some racing t70s in 1966 era look to have elongated & adjustable rear spoilers. Any one having any info please reply, I would be interested in your...

Decided the best solution is to order a new engine from katech.

PS Engine was a new crate motor, Kinsler was added,

Iain, interested in the cooling system , this could be a factor, Prior to any problems with the car. I used the car for nearly 2 hours giving the car full use on the race track, driving it at its maxumin power. coming in only to change passangers, however i did slow the car down for a lap...

Checked the kinsler & Muffler, I have the Hushpower R mufflers after the header which have a stainless cone ending at a point, this should catch the bits. I can only think that the bits have vaporised in the heat. My headers are wrapped & I know the glass wadding melts in the mufflers, so I...

the motor has run for 2500miles mainly road use & 4x trackdays about 2 hours of hard running. the motor has been set up on a dyno. & produced 527hp @ 5639rpm torque 534lb @ 4698rpm these figures are at the rear wheels, The induction system is kinsler & uses 2.5" throttle bodies. So more fuel...

Hi, Can any one suggest why i have a piece of my piston missing, with no damage to the head or piston? i would have thought if a piece this big has broken away in would crash into the valves & piston. I had to remove the head to check for a suspected gasket fault. which there was accross this...

Hi David, If you need any period transfers I have these saved at a printers.