Search results

Steel tube race car chassis, came from TWR. Looks like it was designed for a solid rear axle, It was being converted to IRS, by TWR.The top tubes are only tacked on, the rest of the chassis is all welded & sound. Had this listed on e bay, but removed it as the bidding was only at £19, with...

I've listed this front engine chassis, it was a development project that came from TWR in England. Take a look on e bay no' 320918898173 Open to offers! It's very nice!

Not a GT 40 question, sorry!, but I've picked up a front engined race car chassis, very nice, it has the makers name ''R+D Race To Uk''. Has any one heard/know the makers? (I'll post some pic's later ) Thanks

Hi I need to use a spacer behind the flywheel ( Not ideal I know), only need to be by 1/4" to allow the driven plate full contact on the splines. I could possibly get away with standard ARP jobbies, checked Summit & have Googled - but no joy, any suggestions ? thanks Stock is 7/16 X 1".

I've new bushes that are slightly too tight on the pin, can you use an abrasive to relieve high spots in the bronze bush ( I realise the danger of making them out of round). Will sharp particals be embeded in the bronze? I don't have a reamer & I think the ends have closed up very slightly...

To bench test a 'piggy back' ECU for compatibility, it would be helpfull if no fuel is needed to be run through the injectors. Will the injectors overheat/be damaged doing this? thanks

I assume it would help to use a drop of loctite when pressing in new little end bushes?, the bushes are a tight fit-it carn't do any harm? thanks

Can any one tell me where I can get some CA954 bar stock from in the UK?, I nedd about 4''x 1"OD, thanks

I'm after some high strength small end/ wrist pin bronze bushes, after hours on the net still carn't find what I need, any suggestions? ( US or UK ) thanks

I allready have a Innovate Xd16 gauge, so sticking with Innovate gear, I need to data log. So which to buy,the LM2 has had some bad press- are the units still trouble some?. I've read that the LM1, is a more reliable unit, although more basic. Building a fuel map with out data logging is not...

Picked up a new O1E box, so don't need the ARX O1E that i purchased a while ago. I know that i don't have the posts to allow selling stuff, but I only want my money back on it,just happy to help some one out on this site rather than E bay it!. PM me ok? Tim

I've picked up a nice alloy billit, is the any one allready set up for maching a O1E to 302 adapter plate, whilst on the subject flywheel & clutch- kennedy don't do a O1E kit. Any one in the Uk with any thing suitable? ( new/used) thanks

Purchased a O1e box with a thirty day return policy,I don't want to strip it down. Can any of the fittings be removed for a bore scope inspection?, or is it not to tricky to pull down?. I've rebuilt engines & gearboxs in the past, so I'm ok with this kind of work. Is the any downloads for the...

I've found some info on the site,but not been able to open some spec sheets. This box is a 6 speed ARX 61372 O1E 301 103, is it a narrow first, with 3.50/1.89/1.32/0.87/0.73/0.56 with 3.50 or 4.11 diff? thanks

I need to get a quote for shipping, not been able to find the info via the search/google options, can any one help? thanks

The O1e box 6 speed from TDI 2.5, is the box with the steel section any better than the all alloy case?

Local srap yard has a A8 2.8 petrol early model, its not possible to get at the codes, (car on top), any idea what spec the tranny might be?. I can only move it out if purchased, its at a good price £50.! thanks

Hi, due to a deal going belly up I've located another 944 turbo axle, question is other than stripping it down, any thing to look out for / easy checks? ( I've never seen one out of a car) Is the input shaft solid or is the any float etc? I assume checking for an LSD- via turning one out put...

Hi, I'm doing a new build, & I know very little about Porsche/Audi transaxles, I will shortly be getting a 944 turbo LSD transaxle ( not seen it yet), it won't have any drive shafts or gear change cables/ shifter, can I use Audi parts or 924 Porsche stuff? I realise that the box needs clutch...

Hi, I'm building a Gt40 type car, hope thats ok?, its a group B spice body on a home built chassis ( yet to start). I'm still sourcing parts. so far I have the body, 302ford engine & chaseing a 944Turbo transaxle.Picked up some nice alloy hubs & big vented discs with bremebos calipers. Lots to...