Search results

I have no steering angle sensor, the YAW sensor is from an e46 BMW - #34526764018. The master cylinders are the ones supplied from RCR back in 2014 ... I don't recall the specs but I haven't changed them. I had Doug Wardell (Douglas Wardell ([email protected]) source most of the parts and...

I recently installed an MK60 ABS system on my SLC and it is phenomenal, no more end swapping. I use the speed sensor built into the C6 front hubs and a toner ring on the rear drive shafts.

Hey Rob, Fran did the side exhaust on Mike's LS3/SLC at the shop before he took it home. Probably had the stock LS3 exhaust manifolds or however Fran oriented them is what Mike's (now Craig's) car has.

Put me down for a set ... many thanks guys.

Hey guys, fantastic thread. Paul, did you receive your axle shafts? Any updates to this thread? Just replacing my first set of fronts (Delaney adaptor, SKF Hubs) putting slicks on this week and from the sounds of things I better replace the rears right away as well.

Congrats John, looking forward to a ride!

175 to 127

Hey John, I received my Graziano back with the new drop gears, installed it this weekend and took it for a drive today. Looks like it is working exactly as expected ... about 2100 RPM at 70 mph in 6th gear. I should be ready for COTA now! Everything was professionally done, many...

Hey guys, I registered mine in Dallas 2 years ago as a 2016 ASVE (Assembled vehicle) and it was quite simple. The tax was only like $75 as Cam stated. To get the VIN: 1) VTR 68-A from local police auto theft unit to confirm the car and parts are not stolen. In Dallas - 214-653-3430...

I’ll take a set of CF please Cheers, Craig

I also am in! I have PM'd you John. cheers, Craig

I just spoke with Erik and as noted, he makes the gears and they are $2,000. It is apparently not rocket science but it is about 10 hrs of labor from someone that knows their way around a transaxle ... he estimated $1,000 + shipping to/from Colorado. It is not something that can be done...

Hi All, I wanted to revive an old post to see if anyone has changed the drop gears in the graz and see how difficult it is. I am considering doing this but would like to know what I am getting into. cheers, Craig

Yes, that was my first time on track with the SLC ... Lots of fun.

Ok, fantastic, I didn't recognize them. Cheers, Craig

Pete, I created a very similar shroud but I found it was still getting quite warm in the cabin from the radiator. I bought a roll of reflective insulation from Home Depot and ran it behind the shroud covering the exposed footbox to the left and right of the shroud and I also covered the brake...

Thanks guys, I forgot the specs were in the manual.

Hi All, I looked for a similar discussion and haven't found one and it goes without saying I've watched Alan's videos. I want to discuss alignment settings and I know it is a function of car purpose and personal preference to some degree. I plan to use my SLC for street use and one...

There seems to be a gap in the definitions above: "Kit Cars Definition: a complete body of a motor vehicle, not including an engine, chassis or drive train. Kit body is a replica of an existing or vintage motor vehicle." therefore an SLC is not a Kit Car. It would seem to be a Homemade...