Search results

The SLC is sold

Hello Jacque, Here are the details Reseller directory - https://www.noldengmbh.de/service-2/sources-of-supply https://www.noldengmbh.de/referenzen-e/customer-examples/ncc-r-3d-modular-tail-light-system

Additional pictures

LED tail lights are completed and tested.

Yes, I texted you to the number in your PM.

I like roundies and they make the SLC look very wide, so I started looking for some decent LED taillights. I remembed the Zenvo TSR-GT Supercar out of Denmark. I always liked the way the those taillights looked with the notch on the bottom giving it like a reptile eye appearance, thinking that...

The first part came out of the mold succesfully with only very minor imperfections in the Gelcoat. Fits like a charme. Plug removed from car. Cutout made for velocity stacks. Mold was trimmed in, then cut to allow the rear clam to open. I chose a bolt on version over glued connection on the rear...

Here are some additional steps towards the mold making. The plug was sprayed in high build primer and sanded with 400 wet. A flange was added for easier removal of the molded part. Before the white gelcoat was applied to the first half of the plug the surface was waxed with release wax eight...

Thank you for your interest. Email sent.

I put some time in to get started on making the plug for the extension of the roofscoop. This will take a few more postings until the first part will come out of the mold since there are many steps to be taken. I found it beneficial to put the extra work in to make a reproducible component...

I found a set of Audi drive shaft heat shields for the Graziano on Ebay. I ran them through my self built Vapor Hone cabinet which I am using on all used Aluminum parts as well as on other precious metals, removing oxidation or discoloring, for deburring after machining and transmission gears...

I remembered a few others with DOHC. Audi V8 Heffner Lambo V10 Twin Turbo Mercedes V12 Ferrari V12 Toyota J2Z Inline 6 Lexus V8 Ford V8 Coyote

Thanks Roger for remembering. The engine came with a shoe horn :D.

Thank you Brian, Let's see how this goes...

and a few more...

More pictures

I am considering to sell my SLC after exiting years of building, fabricating, inventing, fantasizing, drooling on it, up and downs, modelling, all-nighters, lessons learned, does and don’ts and lots of help and good times with friends, and plenty of crafty beverages. I am finding myself between...

Here is Rev.1 of the seat brackets. I made them completely new from 1/4" T6061 angle. The old ones were made from 3/16" and I did not trust them to take the additional load from the harness since a cross member was added to mount 5 & 6 crotch belts. The crossmember will travel with the driver...

Congratulations, It was nice to have you and your son over for a visit and that you bought the SLC.

Here are the transition pieces for the air vents in the cockpit made from fiberglass.