Latest activity

Day one of the tear down, meticulously labeled all parts.

Hi Mike I'm looking for a completed car and budget up to and around 70-80k,

You can either make custom mounts for the lower attach points that levels the lower coilover mount. Or find the trajectory of the end...

Ok but the shock won't mount that way here's a pic of how i had it mounted and them out points on arm aren't level do shock is too far off

It’s in a bind because it’s designed to be. Mount the arms level, not the way the c5 is designed. You don’t need that much anti-dive.

Ok folks I'm totally stumped on my front c5 suspension mounting when I mounted the lower control arm level the c5 coilover would not...

Ok folks I'm totally stumped on my front c5 suspension mounting when I mounted the lower control arm level the c5 coilover would not...

lemanscoupe.com usually have stock. near gatwick worth calling Olly

Regarding the front lift kit , I have the old ramlift pro so I dont know how it compares to the stanceparts one, from my experience I...

Jeff, I actually cut ~5.5 inches from the middle, rewelded and then mounted it to the front of the foot box.

Thanks for your ideas, yes the chain is round the header pipe, this was put there by the Exhaust Fabricator as he needed the deck on to...

Thanks for your ideas, yes the chain is round the header pipe, this was put there by the Exhaust Fabricator as he needed the deck on to...

Any concern with that chain fouling with the rotating axle? Perhaps a spring to pull it taught when clam is closed? Blas

I have just had to get a new exhaust fitted after my Catts died due to excess heat, as you can see from the picture there is not a lot...

Hi Walter, I was lucky, I did not moved the lower front arm, because it was already setup for the maximum forward position. To acess to...