GT40s.com - View Single Post

Jac Mac · 12-22-07, 09:44 PM

One belt with 1/4 turn of twist over two idler pulleys will do the job, just try to get a bit of distance between crank & idlers. Going by the pics in the 12 cyl engine build fan runs below crank rpm.

12-22-07, 09:44 PM	#69 (permalink)
Jac Mac jac mac 10 tenths Join Date: Dec 2005 Location: Gore N.Z. Posts: 1,568 Rep Power: 20	Re: Getting started on a 917K One belt with 1/4 turn of twist over two idler pulleys will do the job, just try to get a bit of distance between crank & idlers. Going by the pics in the 12 cyl engine build fan runs below crank rpm.