[Russ]

I had a person who makes electrical switchboard name plates engrave an aluminium panel i'd made up for a project with switch names and a ford symbol once, then i spraypainted mostly near the engraving and when it was dry, sanded it back with 1000grit wet and dry paper and a flat cork sanding block, then polished the aluminium, it came up awesome, as i used black paint in the switch locations, dark blue paint for the ford symbol, the paint sat lower that the aluminium so it maintained its gloss, just had to go slowly with the polishing so it didn't get too hot and bubble the paint. Sorry can't find a pic of it??. . .got one somewhere, will look harder and post it if i can find it