Aaron, why is the top of the fenders cut away for?
Aaron, why are the top of the fenders cut away?
Is there anything to stop the water and dirt from coming thru them? I get all kinds of dirt on the center section of the car from the wheels when you open the door. ITs like a dirt magnet, but I do have a gravel driveway, when it rains the holes are filled with water so Im sure that dont help.
Does anybody else have this problem?
I've been busy the past few days..
1) Fabricated a clutch alignment tool.
2) Removed the doors and shortened the threaded studs for the J hinges
3) Removed the clamshell body.
4) Removed engine and Trans.
5) Remved the roll bar. Needs modified.
6) Removed the bulkhead and modified ECU attachment.
7) Modified engine mount ( no good stand-off spacing). Doesn't match LS3 engine.
8) Flipped and modified the mid-engine mounts to eliminate the ugly spacers.
9) Test fit the clutch.
10) Cursed a few times.
11) Cursed a lot.
12) Laughed a bit about the average Joe building this car with only a few hand tools. Ha ha.
13) Removed the flywheel bolts that already exist in the crank of the crate engine. Wondered why I ordered the ARP bolts ??