They look like C4 vette units to me. Can anyone confirm or had to replace at some point and know what it is? I have far too much run out (can wiggle wheel about 1/8") in one of my fronts and need to replace.
Thanks.
Thanks.
C5 will NOT work
I have bearings made that are great quality compaired to the aftermarket ones available
The ones on the car you have are the older ones that are not the same as we supply now
Hi ScottThey look like C4 vette units to me. Can anyone confirm or had to replace at some point and know what it is? I have far too much run out (can wiggle wheel about 1/8") in one of my fronts and need to replace.
Thanks.
Hi Scott
Just for the record Corvette hubs can have the bearings only replaced without replacing the whole hub as they are rebuildable.
If the bearings are still in a good usable condition it only requires a shim or two between the bearing race seat and the crush tube to bring it back to spec.
When replacing the bearings with new ones it still requires either a new crush tube or adding shims to take up the slack and preload the bearings.
Dimi.