PeteB
GT40s Supporter
I've been working on getting the A/C and heater installed.
First, I bought a new tool
A/C lines assembled:
I made a bracket to install the evaporator unit, drilled the holes, and used some foam tape to make sure it seals:
A/C and heater hoses coming out the side. I bought some bulkhead fittings for the heater hoses and the #10 suction line.
Mounted the drier and safety switch up front:
First, I bought a new tool
A/C lines assembled:
I made a bracket to install the evaporator unit, drilled the holes, and used some foam tape to make sure it seals:
A/C and heater hoses coming out the side. I bought some bulkhead fittings for the heater hoses and the #10 suction line.
Mounted the drier and safety switch up front: