Recent content by geoff

the best spies is 5340 used as wet on wet , no preparation after etch prime to colour, just keep painting

you dont need a build primer thats for over repairs just use the spies wet on wet primer after the etch primer then colour

In 1965 metallic's where mono coat very easy to achieve seven different colors with the same can of paint by altering viscosity, air pressure, gun speed, gun distance, fan size, mixture (amount of paint to air ratio), temperature. all these adjustments alter the angles and depth the metallic...

race line digital just tell them outside diameter you require .when they did mine i also did them for the mag wheel centers

i was not going to reply , Charlie Farley out smarts himself sometimes, always remember the performance of this type of adhesive is adversely affected by increased gap, any gap over .2 mm is not doing anything and will fall off the next day. So roughing up the mirror base decreases the bonded...

a two wheel 40 propped up by a slightly twisted front end

The mirror base must have a very smooth surface no scratches because scratches reduce the surface area to be glued also increases the thickness of the glue thus reducing it's strenght

Jac Mac The side valve has made a come back 365 ally block Ardun ally heads check out H&H flat heads /www. ardun .com

Doors on , your 'A' pillars are all you can use dash,windscreen pillar,door seal to A Pillar this must be done with wheels on and Wheel aligned to align rear wheels in the Correct location with in their wheel arches. These are the steps a body man would use

Alex (efnfast) "what is this place " looks a lot like ED PINK'S engine shop ,they even have a photo of this engine on their Facebook page. regards Geoff

Hi all power coating is a lot tougher finish than paint ,when power coating the surface must be blasted correctly atleast 75 microns (i think that is right i am a crash repairer not a powder coater))and will never flake /lift or corrode. Painting with correct etch primer and 2 pak paint is no...

How do you fill up both tanks at the petrol station ,fill one Tank then try and fill other tank but then the other tank Has put fuel in the tank your now filling or may be take a Long time with a slow fill. What about breather hoses would you need four .When filling left tank breather hose...

Mike weight transfers diagonally check your fronts

From a GT40 to a Rolls your very old

Darrin are your sill panels fitted ,they are What determine front clip height and then fit Doors.