PSE wheels for sale 17x9 front 17x11 rear as pictured
- Thread starter Bobs 9401
- Start date
Devin,
I'm in Wisconsin and the picture of the backs of the rim has all the info on it !
I'm in Wisconsin and the picture of the backs of the rim has all the info on it !
If that's not it I can certainly measure them for you
I don’t recognize the numbering as anything relating to the PCD (pin center diameter) or the backspacing (as measured from the back of the pin face to the back edge of the rim). There are good videos on YouTube if you need help finding these. Other potential buyers will need to know these to see if they will work for their cars since there are so many variables.
Thanks
Thanks
I'll measure them and get back to you !
Some further information required back spacing 17x11 has 4 11/16" and 17x9 has 5" and the pin diameter is 3/4" on 4 5/8" Bolt circle
Howard Jones
Supporter
I see you have GTD on your intro page. Did these come off of a GTD? GTDs have an unusual bolt (pin) pattern. If they are off a GTD and would fit mine then I would be interested.
Howard they were on an a.c. cobra ERA ! I listed the offsets if that helps
Bob, thanks for getting the dimensions. Unfortunately the backspacing and pin pattern won’t work for my build.
Howard Jones
Supporter
Thanks for the info but I don't think they will work for me.
Similar threads
