Search results

Hi The ZFQ thrashes the rest at Road America by a country mile, it's the logical upgrade to the 45 year old design of the ZF for today's high output power plants, with better ratios, shifting, and putting the power down through the ATB differential. (costs less than an RBT ZF too) A direct...

Hi As I said above the output shafts on a 917 Porsche are 200mm from the bottom of the chassis and you can fit the output shafts on the ZFQ at that height. The transaxle you have ordered is a special build with a 5" extension on the input shaft to place you 6 banger 911 engine closer to your...

Holman Moody Kenny Thompson

Hi Jac just playing with you. Chris. PS. your trans is looking good.

http://www.gt40s.com/forum/gt40-build-logs/17871-chris-melias-mono-raiders-lost-arc.html

Hi The G50 in the 911 has probably 3.5" more ground clearance than your 917 so to enable the drive shafts to sit level with the engine as low as it can go you need the output shafts higher than the input shaft, that's why they flip the G50 for Ultimas and GT40s. Dont worry it will work out...

Hi Jac I respect your input on many topics, but you need to read further and know who I know. Quife certainly do not warrant this transaxle at those figures. I work with Quaife and visit the factory monthly. Have you actually seen one of these FF Transaxles? If so post a real picture not a...

Good luck Herman hope it all goes well regards Chris Melia.

Hi Andrew dont be sucked into this nonsense, and dont believe all you read, its an attempt to sell more GTM kits with the promise of fools gold at the end of the rainbow. Its not a moon shot 5th gear its a moonshot transaxle using a steam driven rocket and other peoples none refundable...

Two b/w pics

Hi Guys My car will be fitted with the original AMGT/2 alloy bodywork from the Alan Mann days, Weslake engine and - 0 ZF transaxle, regarding the use of Hewland transaxles in the GT40 I have a Fav rear suspension drawing that mentions the Hewland transaxle on it? Regards Chris.

Hi Carel you have PM Chris.

second try withphotos.

Thanks mate, we are close to getting the hubs assembled ready for knock on's with huge Porsche styled wheel nuts. Regards Chris.

Some progress on the prototype 910/906 chassis. We are just positioning and checking as we go. We are using the 911 steering rack, and column with Momo wheel. Porsche uprights ect. The suspension is fully adjustable. Once we are happy with the setup we will blast and powdercoat. regards...

Thats the way to do it?

Hi guys just a note to say that the ZFQ team were extremely happy to see Dennis Olthoff in his Superformance GT40, fitted with a ZFQ transaxle thrash many original GT40s on track at Road America, including the Holman Moody 7 Litre Mk11. The ZFQ is setting the modern standard for high...

Hi I can't divulge the English owner as he wants it kept secret. You can get one off this guy in Poland his name is Jack located just outside of Katowice. Homemade McLaren F1 Replica with BMW V12 - with VIDEO - Carscoop I will post photos later, off to Road America. Regards Chris.

Hi Fred Bubble posted today Regards Chris.

Hi Brian you are not alone, I'm also confused with this cryptic post? This Forum demands better, come on spell out what you are trying to say. regards Chris.