Search results

Jac Mac: What took you so long, i expected this post much earlier and your feedback is always highly appreciated:thumbsup: Restriction: Mhhmm , believe you are right, but i will try everything not to. Will give it a try with the standard Weber parts first. But if they not achieve the...

Check this out http://www.gt40s.com/forum/gt40-build-logs/25889-bobs-rf40mkii-134-a.html What car are you looking for Pay Fran a visit will defenitely help to decide ( or make it even more difficult :-) TOM

HAd to laugh at that description "lightweight manifold" . This intake manifold is quite ok casted, but everything but lightweight. Throttlebody setup looks like it even can be swapped side by side to have the fuelrails and injectors running inside. would fear a bit the synchron movement with...

But exactly this has been the idea to eliminate. If one relies on the individual idle speed screws of each carb, you would have to overcome the tolerances first at every action, because the levers rest on the idle speed screw and every tension will be taken out of the linkage in idle. When you...

Hey Fran Happy birthday buddy (preparring your 500kg present for shipping this week) TOM

Rob Changing the gearbox from street to track. Interesting to say the least. SLC is a sportscar. Almost noone is driving it like a cruiser on the street. An engine with that power and torque don´t need a street gearing ( besides you plan to attack the roush hour daily, but than i would go to...

Andre G96/?? assume either a G96/50 (996 turbo) or G96/96 ( GT3). G96/50 in an RCR also if your check out this vid ROBERTS RCR40 GT40 MK II - First start - YouTube TOM

CHris dont know. location of thermosensor-bungs is different on the ones you show. Dave, where can you see a complete system for 1395 USD ? think their price for a complete system is ( SBF TK3402) 3800 USD There is probably a reason for the feedbacks, i can state no problem with them...

Dear Chuck i see what you are saying. Don´t think that the 4,5" K&N will make a difference in performance ( unlike the teastrainers, which in fact are not a filter , rather only a debris protection and i´m convinced they would cost me more than 20 HP especially on 6000 RPMS and above) This...

This are my datas height front 4,25"; rear 4,75" Caster front 5° ( upright angle) (lower ball joints all the way to the front only one safety washer and one standard washer inbetween, upper ball joints all the way towards the rear only one safety washer and one standard washer inbetween)...

HI Dave found it in ebay and than contacted them directly to get an even better price SBF Ford 289 302 Intake Manifold for Ida Carb | eBay There was some milling required to clear the thicker valvecover rail on my heads, but this was very straight to be done (30 min). The ID of the...

Finally got my 8579 fit. Thanks to Randy and Mike. Mike you made me aware that basically what i have has the same shape as an Inlese/Pierce intake ( thats also the reason i bought the procomp because it looked so similar) and if Randy made his one fit with a bit filing here and there, i figured...

Thanks Mike Actually it fits quite good in terms if machining and fitting into the V. Defenitely better than my EDELBROCK. But this said, most of them likely are cast in China. Will do the welding solution. Should be non of a bigger deal. TOM

Thanks for all the answers Manifold is in correct position, four of the center bolts are fitted to glue on the gaskets for portmatching at that stage. Intake is from PROCOMPELECTRONICS with a vacuum plenum connecting all runners into that plenum. Just grinding of some material of...

#nr ? But i see also that your intake is much shallower than mine in this area, probably because i´m using an intake with a vacuum plenum and yours is likely not. THanks TOM

My actual Distributor will not clear the new Weber intake. it still needs about 10mm to fully sit. So a distributor with a 1/2" taller lower housing would be ideal. My disszy is MSD# 8579 and runs perfect. Called MSD an they say they do have taller ones but not with the small diameter disszy...

Thanks i have quite a lot thermostats available no for testing. All of them are Shaw thermostats. in 160 and 180°, nonmdified and modified ( bypass holes in the membran) will start with the 180° thanks TOM TOM

hey Chuck what is the distributor you are using? Thanks TOM

Dean , On the first pages of the thread some links to pics are lost. But there should be no issue on later pages ( as of page 3 or 4). Planning on changing from my 750 Holley setup to a IDA 48 setup. Im starting on preparing my IDA 48 setup now. Collected two pairs of used IDA 48. one pair has...