Search results

Thanks guys I will look into the Dodge Dakota light what year

Does anyone know what taillight is used in the SLC. Mine cracked after the wreck

No my mechanic was going to disassemble them to see what happened but we just ran out of time, I have already thrown everything away. The main problem I have had with the SL-C is part failure, it just does not make sense to have so many part failures with so new of parts. We have found if a part...

We found out that the master cylinders were bad, went to bleed them and the peddle would not come back up. We decided to change the master cylinders to a wilwood 1" and have the reservoirs at the cylinder not the remote system. It makes for a harder time to check and add fluid but we did not...

If you need me to I can take it back to Chris at Heedman/Hustler and let them make a jig. I am on the forum build 002, mine is the second production chassis, let me know if you need specific pictures will be glad to shoot some more. Good Luck Grant on your build, Bob D

Yellow stands out so all the police get a good look as you go by, you want them to look and just cuss because I am not going fast enough to pull me over, well maybe next time. Sounds good, put a rub rail under the splitter so it will rub on wood not fiberglass, I raised mine but every once in a...

Alex it is too bad I did not know about the exhaust being done. I had a set of headers and exhaust pipes with cads and mufflers and tips for my car made by Heedman/ Hustler headers. They still have the jigs and said he can make the system for $1000 for the headers and I don't know for the...

If you go to my build it shows the layout of the intake and the modification to the tail to allow the cool air right at the filter, it also helps to get cool air into the motor compartment back where the exhaust runs, it may not be as aerodynamic as the one above but it does work

Went to the Roebling Road Raceway couple weekends ago, did a video but it had too much glare off the windshield so you can only hear the car. From there I went to Daytona and spent a week there for vacation. Took the car out on the beach for a photo shoot, what a story. I got out of the car and...

Alex I have posted some pictures for the routing of the shifter cables. In the first picture is where it comes out from the tunnel and makes a hard turn, we kept it fairly flat coming under the alternator, in the second picture it shows the cables coming under the top of the frame by the...

Alex we have replaced 3 sets of cables before we found out to reroute the cables, I can tell you it gets so hot next to the headers we could not find a shielding that was capable of keeping the heat off. Route the cables to the drivers side up and around the side of the motor and to the top of...

Been having problems with serious brake fade so here it what we did to get the cooling duct closer to the rotor. We have changed brake fluid to 600* and are modifying the inlet on the nose. We are also looking at the check valves in the brake system trying to get input on what to do with those...

Problem at Atlanta Motorsports Park.I have video of the laps and will post this when we get it together so everyone can see the new track. Spun it coming out of a turn and backed it into a guardrail we were almost stopped when we hit. I can tell you it was a great time all the way up to this...

As usual I am a little late to the thread, I saw the pictures of the Cadillac LMP and had to throw it in, a friend of mine was in charge of that car. He has shown me lots of pictures of him when they were at LeMans. He said they had around 6 million in that car. He told me about when they were...

Alex set ups are not as easy as you think. It takes hours to really get it right or longer. I have read all the inputs and they are all basically right. I suggest that if you have never done set ups before see if you can find a race team or shop that will come over to your place and walk you...

you get the feel when you extend it and I have the car set so I when I push the clutch in it extends my leg just right when it is where it needs to be. I have put 2600 miles on the car without a clutch stop, but we are working on one now started the design yesterday, ran out of time will get on...

Ben I like the yellow, since mine is yellow also. Like the black stripe, I have been thinking about what kind of accent stripe or design I want, yours looks good at least I now see what the black stripe down the center option looks like. I know you can't wait to get the car, anticipation is a bitch.

Alex it bleeds like the brake system if you have the pressure bleeder fill the reservoir and pump the fluid to the bleed valve with the valve open till it gets fluid. Close the valve, get in and work the clutch pump it a couple of times make sure you have peddle then you are done, if it still is...

Troy I also agree that you need cats. It was a requirement for my car to be street legal. In fact I am right now working on passing the emissions test here in Georgia. As usual nothing has been easy. I had to get a non conformance waiver, got the test done and it failed. Took it to a guy to...

The hood has two holes for the pins to secure the hood once down and in place. You can still have the hood swivel and pin to secure it, I think this is a good way to go still. It makes it easier to open the hood and not have to find a place to put it and risk scratching it. I will try to post a...