Search results

Yes, it is titled and registered.

Connecticut

Completed Superlite/RCR GT-R Built by Allan LS376/525 hp engine, runs and idles beautifully Graziano trans-axle Drop gears available (not installed) Spec Clutch Mid-rise air intake Canton baffled racing oil pan Coil pack covers Headers, mufflers and cats Infinity Power Box wiring system Raptor...

Here's two.

What if any brake residual valves are you using? I've seen where the stock residual valves get stuck causing a vibration like that.

Locate the master cell input wire for the ac clutch, the one with the inverter. Cut the wire between the inverter and the master cell. With the ignition on, ground that wire that is still connected to the master cell. The circuit for the ac clutch should then come on in the rear power cell...

Looks great. Do you know what system you'll be using for the power brakes?

https://www.midwestclassicinsurance.com/cobras-kits

Top row in pic, mounts for parking brake handle. Used for SL-C on interior center rail. Next row, front engine mounts, slide on frame between were the engine mount sits on frame. Parking brake mount. Gated shifter mount. Tabs that bend down are for SL-C, but you can remove them and use for...

I spoke with Jay at Infinity and he is in the process of developing 2 negative outputs from the mastercell that will activate each of the motor controllers already in the car.

You're welcome

Have you opened up the Fitech surge tank? I had one where the tube that goes from the pump in there to the outlet broke. It would then only supply 20 psi. What is the output of your alternator? Is it more than 50 amps?

1500 hp, 1305 rwhp twin turbo

Take the 2 output power wires for the fans in the Infinity Box and splice them together. Run 2 output wires from the splice. 1 wire to the trigger wire on a 30 amp relay and the other wire to the trigger wire on another 30 amp relay. Run an in line fused power wire from the battery (or mega...

You can email the owner of the company directly: [email protected] They will fix it without charge and ship it back.

Thanks, the hood design also allows for hot air to exit from the radiator keeping the temps down in the whole car. It's a House of Kolor tangerine kandy over a silver base. Yes it was along side Granville's.

If you have the Infinity Power Box system the 663360 above is the easiest install. Just connect the systems inputs to ground then match the systems outputs to the master cell inputs.

https://www.demon-tweeks.com/us/summit-technologies-raptor-wireless-steering-wheel-button-control-system-663360/ or https://www.demon-tweeks.com/us/summit-technologies-raptor-pro-solid-state-steering-wheel-button-control-system-851896/

It's an item that is easy to bend too much and break so I can see how you could have broken it. Fortunately it is an easy swap and you have the correct part above. Trace the capillary tube( the tube you broke off) to where it goes into the hole in the aluminum under the dash. Straighten...