Search results

Switch the now passenger side mount to the driver's side and the driver's to the passenger and the spacer won't be needed. Then there should be plenty of room.

Those panels go behind the rear tires as a tail light close out. You will have to cut out an access panel in them and make a panel to cover the hole.

M10x1.5 pitch, threaded rod cut to length (about 6") except the one that goes through the starter housing. Mcmaster has them and a meter length is enough. Put the threaded rods in the adapter plate and then slide the trans. on. Make sure not to make the upper left one too long or you won't be...

The larger bore for the rear brakes is meant to balance the braking. 7/8th is way to big for the clutch making the pedal hard to push and can cause over extending of the clutch fork or hydraulic throw out bearing. Not something that you want to happen.

The 3/4 goes to the front brakes, 7/8 to the rear brakes and 3/4 to the clutch. I tap left hand and right hand threads into the same hollow rod that supports the splitter and use 1/4-28 rod ends with a 1/4" hole. All the rods get cut, I put the masters in place and mark the rods with the...

The mufflers could be larger in diameter and still fit.

As long as the newer gold blade throttle body is matched with the newer GM ECM and harness it will work perfectly.

Gates K040365 Multi V-Groove Belt

Those would work in the front, there should be 45 degree ones from summitt for the rear also.

The 45 degree fittings should go in the rear and the straight ones in the front. The fittings are part of the kit.

I have over 100 SL-C build videos currently on my You Tube account that have been viewed over 120,000 times. I am about to embark on my 9th SL-C build and before I do I would like to see if there are any areas that were not covered in them or some that need more clarification. There needs to be...

It's pretty simple for me. If I had issues with the SL-C, RCR, parts or Fran I would not be building them. I am currently finishing my 8th SL-C with many other builds including an airplane in the past. Every issue that has ever arisen with all 8 SL-C's have been professionally resolved. I do...

Looks fantastic, great job Garry.

Soon... And for everyone that asked I'll be making one about putting together the door actuators and installing them.

He just really liked the SL-C, especially how exotic it looked. He was unhappy that he didn't have anymore room in his garage.

Went out for dinner tonight and it was a good time to take my SL-C out for a drive. Of course we sat at a window table to keep an eye on all the people that would stop at the restaurant to look at the SL-C. At least 25 people stopped for pictures and you could read their lips asking each other...

Plug either port, doesn't matter. The exit line will route best facing foward.

LS9 in the works