Search results

I will try and dig out a picture to show it more clearly.... when designing your anti roll bar for your SLC be careful. There are a few things to consider when designing anti roll bars. Firstly make sure your linkage is a minimum of 3 times stiffer that the torsion bar part, or you will...

Hi Howard, Firstly the torsion bar at the front is the anti roll bar, all the cars weight is taken by the springs and dampers (seen at the back of your picture) I think the bit you are missing is where the anti roll bar is fixed to the chassis (out of sight inside the monocoque) it is on a...

Found some more bits that might be of interst:- Brembo Hand Brake Calipers £300 part Number 22.5921 (ferrari 458 etc) Rover to Renault bellhousing. Its a bit scruffy, but as far as I know never been used £150 Disc bells and AP racing floating bobbins, They fit Granada hubs and 190.5 P.C.D...

Hi Robin, No sorry, the tanks and seats have been sold.

Hi Mike, I have a guy coming to look at them, but if he does not want them I will let you know. saying that I am not sure how much it will cost to post them half way around the world? I am sure it would be cheaper to get a pair made in Australia? Regards, Brian Coombs

Hi Stephen, The seats have gone, but the other parts are still for sale.

Hi Keith, Thanks for the interest, unfortunately I have someone else interested and I have promised them to him, but if the sale falls through, I will contact you.

Hi David, The measurements are 190 wide x 210 high x 1460 long. Thanks, BC

Hi David, Private Message Sent.

I Need to make some space in my garage! 1 pair of used seats, one seat missing a couple of eyelets but easily fixed £300 1 pair of used Fuel Tanks with level senders, a bit scruffy, need cleaning out, but will work fine £250 1 ford Racing Camshaft M6250-A312 £100 1 set of 8 new ford racing...

Isn't that a perfect example of how the Internet is supposed to work! Good luck with the build, post some pictures on the "Build Log" page

Nothing to do with me, but saw it and thought it might make a nice Christmas present, if someone will buy it for me? FORD GT40 Monocoque Chassis | eBay

Hi Nik, I have a GT40 replica that started life as a KVA, and I added a roll over bar, (see attached picture) I have the drawings somewhere. If you are interested I will dig them out.

cool, Does the gearbox you have just bolt straight on? or do you need an adapter?

Is anyone out there using plastic fuel tanks? I was hoping to use a proper race car bag tanks on my replica, but they are just too expensive, I have used aluminium tanks on previous cars, but I have always wondered how well they would withstand an impact especially around the welded seams...

Zonda? is that is a V12 in the background?

I have a pile of new parts to build a new engine, Performer RPM heads keith Black Pistons Eagle rods etc, all new except the block (which has had a sleeve on one cylinder and re bored +30 thou) and crank which has also been re ground. I am not sure the block and crank are worth using, so I am...

Very nice uprights Martin, the bloke who did all the drawings for the parts must be a genius!!!

DTA P8 Pro ecu, complete with 2 plugs, new pins, user manual, and software, 450 pounds sterling

AP racing CP2636 calipers, form early 70s endurance racing spec I have the AP Drawing if required spare parts, seals etc, still available from AP 350.00 pounds sterling available in the UK,