Search results

John Most production cars have the condenser in front of the water radiator. It sounds like your cooling system could be marginal. Brian.

I Agree, the heat in the engine bay affects the efficency of the condenser. Brian.

Hi Eric There are plenty of suppliers in England such as Merlin Motorsport, Raceparts & Europa but if you want to source one in the States try a Land Rover agent. The "70" refers to .70". I think the Land Rover uses a .75" which would do at a pinch. I think they were also fitted to a lot of...

Ian I am sorry to say but they don't look 100mm from the stop lamps so won't comply with the IVA. I thought I should point it out while you can still move them. Brian.

Hi Fred, Just seen you post. Yes I have the steering wheel logo on my system. Send me a PM with the details of size etc. Is it for a steering wheel or another application ? Brian.

Very neat Paul, I like it. Brian.

Paul Because the tubes are curved and angled they also need a twist on them to keep the underside flat to receive the undertray. I believe you are going to Bearwood College show on the 24th. I will have my car there and you can have a look at my tray. Brian.

Thanks Frank but as Ant is local I will take up his offer. Ant, thank you also, you have a PM. Brian

Has anyone not too far from Newbury got a set of Granada 5 bolt wheels or similar that I can buy or borrow for about a month. I need to get a car to the bodyshop and the wheels for the car won't be ready in time. Any condition will do. Brian.

Being a real pesimist here, years ago I had a Triumph 2500. The crankshaft thrust bearing had worn so much that when you pressed the clutch the first part of travel was pushing the crank forward.You then had to pump the pedal a couple of times to get enough movement to free the clutch. As the...

Hi Brett Mine is 9"

Chris I think you are a fairly (nearly left the 'l' out) friendly guy. That's a pint you owe me. Brian.

Brian, I am within 1/2 hour of Thruxton and know someone who will be going to Tasmania in January. I haven't asked him yet to take it but I am sure he would. PM me if you are interested. Brian.

Hi Robin, This picture should explain what I mean, to give clearance for the tyre on bump. Brian

Alonso in a Ferrari and Jean Todt holding the reigns - that has to be a good bet!!! Brian.

Robin, Normally the bottom half of the panel behind the front wheel is upright then comes forward at a sharper angle. Might be worth checking wheel clearance at full compression before you go too far. I am taking an interest in this car as it went through my hands earlier in its life...

My condolences to Ray and the family at this difficult time. Brian.

I think it was inevitable anyway, with Casey out of the recconing and Rossi coming out on top of Lorenzo when it came down to a battle. But it is still nice to watch not knowing the result. The 125 and 250 races were better to watch. Brian.