Search results

Yessir...cleaning up the shop of spare parts, making room for a new toy!

I wasn't sure which way to go with wheel diameter with my RCR build, so I bought both sizes. I ordered these through Vintage Wheels and had the rear 17" wheels widened from 10" to 12.5"sets. That modification alone was over $1850 for the rear wheels, the Weldcraft's widening process, and...

Rear Bonnet Captive Pin Brackets Not sure what to call these but you get the picture...they are extras from an RCR build but can be used on other cars using a hood pin kit. These are in raw form. You can drill lightening holes, etc, as pictured in the example below. $50 for both, plus...

(SOLD) Sponsorship Decals Historic Motorsports decals. Two sets each (total of 4 pages of decals). $30 for all 4, plus shipping from Colorado.

Headlight mounts (SOLD) These are two extra headlight mounts that came with my RCR. They should work on most any accurate GT-40 body. $50 for both, plus shipping in a flat-rate envelope from Colorado.

-SOLD- Round Fuel Cell Fill Plates New, never used from ATL Fuel Cells, I have two Fuel Cell Container Fill Plates (TF-107), with gaskets. Specs from Summit: ATL Fuel Cell Container Fill Plates TF107 - Free Shipping on Orders Over $99 at Summit Racing Fill Plate Bolt Hole Quantity: 12...

-SOLD- Mallory Pro Comp Series 140 Fuel Pump I have a new Mallory Pro Comp Series 140 Fuel Pump, new, still sealed in the bag. Part # 29259, 140 gph, 12 psi max, 3/8 NPT From Summit: Mallory Comp Pump Fuel Pumps 29259 - Free Shipping on Orders Over $99 at Summit Racing These Comp Pump...

-SOLD- Fuel Tank Pickup tubes These are two spare fuel tank pickups with gasket that came with my RCR GT-40. An AN8 bulkhead fitting, tip over valve, or vent fitting can be used in the spare hole. $20 for both plus shipping from Colorado.

Hey Rick, totally agree. You can also hide the COPs in the sponsons and feed the plug wires up to the plugs. Your exhaust is coming along nicely but can't tell if you're running double slip joints at the collectors. If you don't, you'll get all kinds of O2 leakage downstream to your sensor...

I should be able to produce some pics of that area for you tomorrow... FWIW, I believe you will soon find out that handbrake doesn't do much to hold the car, it's unsightly, and gets in the way of your elbow. I've decided to pull mine off and use a hydraulic "line lock" solution. From the...

(SOLD) Hoosier 275/60-15 Street TD tires I have two of these Hoosier TD tires that were only mounted in the rear of my GT-40 once and used for mockup in my garage. See attached pic below to see how they look. They have not been on the road. I don't think shipping will cost much if they can...

Bob, I'm preparing to post my brand new 17" BRM wheels and tires in the For Sale section. I had the rears widened to 12" and I have tires already mounted. The fronts are the standard 17x8s. They never been on the street. They were used for mockup in the garage only, suspension setup, and to...

Coming from an aircraft background, I'm hooked on doing my own wiring, connectors, PTT lamps, and using acft circuit breakers (no fuses to burnout). If you're up to the task, order a few spools of different gauge aircraft "Tefzel" wire from places like Aircraft Spruce, and get started. The...

Hey Chris, I used the 3-way Enderle AN6 fuel shut-off selector valve for a dragster on mine. You'll need to swap the firewall mount female ORB fitting with another male AN6 ORB and you're good to go. You can use a solenoid to bump the selector arm left or right, or just use a "choke cable"...

SOLD!! Thanks!

SOLD!!! Thanks!

Brake rotors have been SOLD!!! Thanks!

Sorry Chris, just saw this and didn't get an alert about your response. What I used for the door jamb is the ultra-conformal "gap-sealing" acrylic foam tape. Get the one that expands to 2" (1 1/2" min) and place it behind the hinge line top to bottom. Buy it here. You could also attach it to...

Nice onboard with Jim Pace narrating two laps in a 1966 GT40 MKII onboard at VIR. Jim Pace narrates two laps in a 1966 GT40 MKII onboard at VIR - YouTube

Although, I've seen the door tops lift as stated earlier (Goodwood races), my door structure must be pretty stiff as I have not witnessed any lift at up to 140+. My doors came with an inner door panel structure bonded to the outer skin, perhaps that delays the inevitable, but at our 75-80 mph...