Search results

Hi Rod. Doing fine,working hard building an apartment for the last 4 months. Yes I still make pedal sets from time to time. Jim

Thanks guys, Troy I was in the same race as that car. I was in the same marque but on the back side. The plans I have where used to build that car. I did speak to the owner but I walked away as he was lets say mmmm no I wont say it. Jim

On my 40 I put one either side of the transaxle towards the rear and did some covers on the front to take a hose down to the underside of the car. The lower ducts are attached to the lower arms so they are at a constant height and have never been wiped out. It works very well, but I do not run...

I think they are fairly long, its the rear housing it has a mount built into it. You might want to measure its total length.

Hi Jimmy. No, life changing year, getting a divorce after 33 years. So moneys been going to other people and I don't feel in the wright frame of mind to be building cars. I will get back to it next year sometime after the dust settles. Jim

Very nice work , love the brass adds art to the job. Guys what he has not told you is he machines the light buckets out of a billet. Hats off. I watched your Sandown flick , you need to turn the camera off before you take the helmet off, it scared me for life. Ha Ha Ha Ha jim

Wow Bob 15 years between reply's I think that might be a record. Jim

Part 27 would be mounted to the firewall. Make the rear box linkage then 31 ends up just being the bit in between to make the link is the way I would attack it. 31 being in top and lower drawing. You will know how far 31 move for and aft once 40-41 are made and fitted. Jim

Ryan Reading your post I gather you are scratch building. If you are going to do this properly you make it fit the wheel you have. If you are thinking the wheels are scrap then you need to sort your wheel issue first. Whitehourse ind make spun alloy rim halfs. You start with the wheel, the...

You need to measure the inner barrel on your rim. When I did the 206 its a 13" rim. Wilwood had a caliper that in the spec sheet listed the OD fitted to a 275mm disk. I had the barrel size so it was a good start, I ended up with 2mm clearance. I would think wilwood would have similar specs on...

I am gathering the pad hits the hub of the disk. you can cut the 996 pad down as long as you dont have piston hanging over your pad. Caliper kits for the brembos might be worth more than a wilwood caliper. Im on 15" and I use a 296mm disk 30 wide I think ,VE com. To be honest I use the...

Thanks Ken It is in the middle of a big clean up and deal with a few minor issues and then its on the market. I am in no hurry to sell but it will be going. I have made a decision to deal with a few things as I need a sea change and the 40 is part of it I am afraid. Several of the ozy members...

The cages must be difficult to remove. jim

Your fuel pressure will only need to be about 40psi. It will be regulated by a pressure reg and sent back to tank. My reg is at the tank, this stops the hot fuel coming back from the eng and being pumped back into the tank. Inj timing is a function of the ECU. it is programed to give the...

Cop it on the chin and fix it. jim

Adjustable seats ends up being a new seat. I made seats to work with adjusters. Tracks are on the outside and the seats drop down between. You never have enough room ,you are finding that out. Jim

I went to a sail make. Jim

How do you find them John. Jim

Welcome , cant answer your transaxle question ,but welcome. Get some pics of the project up when you get a chance. Jim

I have done the same, also in the front just forward of the hinges it stops all the crap getting into the hinge area and under the front of the doors. Like you say you dont notice them after a while. Jim