Search results

I did, the trans in the pic above has no clutch in it. even when the clutch is mounted the starter gear teeth do not engage unless you are starting the engine with power from the battery.

Russell Performance 641431 - Russell Brake Adapter Fittings - Overview - SummitRacing.com this is the fitting I used to connect the Ricardo clutch slave cylinder to a -3 hose. its's a 10 mm to -3 AN fitting. un screw the old Ford hose and install the adapter into the existing tee fitting. the...

Well I don't think they mean Chris Evans the american actor that was in Fantastic four I think they are talking about Chris Evans the British DJ

Do they come in different sizes? or maybe different load ratings? at what size do the switch from the clear tape to the gray duct tape?

Thats the same one that we just put in my son's 92 mustang 302. had two plug in connectors. bought it from summit racing. looked just like the original. I think it is just a stock replacement for any 2g ford alternator. serpentine belt also found this thread...

A modern automobile has a 12 volt electrical system. A fully charged battery will read about 12.5 volts when the engine is not running. When the engine is running, the charging system takes over so that the voltmeter will read 14 to 14.5 volts and should stay there unless there is a heavy load...

you should see 14.5 all the time when the alt. is working. with key on and engine not running you should see 12.6 volts. then start the engine and if you then see 14.5 volts the alternator is working. it takes 13.8v to 14.4 v to charge a lead acid battery. if the alternator is not working you...

silver state ford sells them for $555 + 35 core. https://www.silverstatefordparts.com/oem-ford-parts.html the best clutch is the one made for Stillen by AP it's a better performing clutch for only $ 100 more but no core charge $ 1878 STILLEN : STILLEN Ford GT Performance Clutch by AP Racing

the 930 Cv is a ball plunge joint not a tripod joint. tripod joints do not have the curved grooves for the balls http://www.gkndriveline.com/drivelinecms/export/sites/driveline/downloads/brochures/driveshafts_english.pdf

The box it came in from ford $550. may help in your search, good luck. let us all know if you find it cheaper.

And I was going to buy that same shirt and tie.

I would say they are of good quality the are not HRE wheels but then they don't cost $1400 each either. I believe they are about the same weight as the stock wheels. check out west coast corvettes they sell most all the brands for corvette Corvette Stock Replacement Wheels - FREE Bonus...

I bought a set of Z06 wheels at the factory warehouse $ 1000 cash. he also has tires at a great price Factory Reproductions with those brakes you will need the special Z06 offset. they also have 18 x 10.5 and 19 x 12 in most styles that are not listed on the web site. black chrome also which...

Pete, I will measure my gear if that will help.

You can use click bond studs if you need to fasten a stainless steel sheet metal to the underside of the fiberglass without drilling thru the clip. use the fiberfrax under the plate and very little heat will get through. CLICK BOND STUD KITS from Aircraft Spruce

MICRO LOUVER AIR SHIELD from Aircraft Spruce MUFFLER/CAT HEAT SHIELD KIT from Aircraft Spruce http://www.aircraftspruce.com/catalog/eppages/kevlarheatshield.php

Fiberfrax is what I use on the fiber glass aircraft engine cowling to shield from the exhaust pipe heat. it comes in 1/16" or 1/8" thick and can withstand 2300 degrees f. it can be glued to the inside of the fiber glass and then covered with a thin .016 stainless steel sheet metal. works much...

Howard, thanks for the link. This is what I am looking for.

anyone have any experience with the Aurora gauges? Quality? it looks interesting it may allow you make a gauge that looks like the original gauge face The Hoffman Group - Aurora Custom Gauges

you should use one type or the other. do not mix. the c/v joint make the drive shaft travel at a constant speed and the u joint makes it travel at a non constant speed , so you are constantly twisting and un twisting the drive shaft. not good