Search results

For those of you who have not wrapped your panels or maybe considering the carbon fiber option; you may want to consider wrapping in alcantara. I have found it has reduced the cabin noise a bit and makes the ride more enjoyable.

New interior picture; I just finished my dash in Alcantara

Yes, Warren built this car and he did very well. I just posted what happen because I was surprised and I wanted to see what other SL-C's are doing out there. I am not trying to brag by any means; I have no right to. All I have done in purchased a well built car and drove it. I have no reason...

You are pretty close, the SL-C put down just over 689 RWHP so I am not sure what that compares to when you speak about flywheel power; which are the posted HP ratings used for the other cars.

Sorry, there was no videos taken; at least on my end. I will search around and see if anyone else has video.

No one said we were on the street...

Yes he knew it was a race, he did the honking and two out of three times he got the hit, but every time the SL-C would pull away pretty hard.

My car has the LS7 stroked to 441cc with Richardo transaxle. Today I got the opportunity to race a 2016 McLaren P1 and a Porsche 918, we did three different pulls, from 30mph, from 45 mph and from 60 mph. The results were the same every time. The SL-C pulled out from the cars and by the end...

Wow, Will!!! That is awsome!!! Please send more pictures.

I do want pictures, that way I can steal some good ideas for interior.

I used contact cement from Lowes, you have to make sure you get the liquid and not the gel. I poured the contact cement in the in an air spray gun that has a 1.8mm tip and I used around 80psi. I sprayed both surfaces, then let them dry and started working the material on the part. The...

Last night I started to cover my interior pieces in alcantara. Since my A-pillars do not line up with the body of my car; I used Dynoglass to contour the A-pillar to the body of the car and fill the gaps. Once the panels were covered and installed, I came back with door edge trim that you can...

i will make sure to do that...thanks for the advise.

I didn't know there was one planned already; Like I stated in a previous post, my wife and I are interested in going Coast to Coast, so if anyone else is interested send me a PM. We can get a group interested and choose dates that work for everyone.

Since I have acquired my SL-C I have driven the crap out of my car with a none disclosed amount of miles (due to insurance contracts). The reason I do not drive my car daily is because of all the attention it draws. You can not go anywhere without a crowd...even on my 3 mile commute to work. I...

I do have an SL-C but I did not build it. The more I look at my car the lines of the car doesn't bother me as much but there are lots of spots where the gel coat was not filled properly and there are pin holes and there are spots that the clear coat is thin and looks like the paint got burnt in...

I was unaware, thank you!!!

Okay, I was thinking about doing a wrap on my SL-C; this is what I came up with. Be honest, it won't hurt my feelings. The thought behind this was to have different designs and lines to mask the body panels not matching up perfectly and instead of random designs, I decided to do equations and...

Thanks Stuart; the car has been pretty fun so far.