Search results

Had a disaster trying to remove a spinner snapped of one of the ears on my RF, does anyone have an early RF spare Spinner they are happy to part with standard RH thread

Hi Randy Thats the bom I have a vacuum plenum below my runners still not much good with the M48 Motec it just cant read any MAP changes fast enough. I think I sorted what was causing my issue my TPS is a con-tactless Magnetic unit so it doesn't wear like the mechanical types but it has a small...

Hi Jasper, I have spoken to Motec directly pretty much no way of using vacuum to control anything accurately with ITBs as long as I'm using the M4-48 ECU. apparently the ECU cant get the MAP sensor to react quickly enough, the explanation I was given was the its very difficult to measure...

Thanks Rick that perfect assume your using this table, 347 will be way tourquier, mine revs doesn't start making power until 4000rpm and comes on with a bang so Im guessing I may need to add a bit in further up the table, Dyno time doesn't help it has to be done on the road with a lap top and...

Thanks JP I have an old Motec M48 MAP sensor is not fast enough for ITBs tried it some years ago and now nobody is using the DOS based system any more. it worked well until recently and could weather could have something to do with it :) it pulled the TPS (magnetic) and noticed the spring...

Is any willing to share an ignition table set up for TPS load sensing not MAPS sensing for Motec (old M48). ITB's compression is 9.5.1 fuel is 98 octane Mick

The only way I have managed to make the 8 stack system work was to persevere. 1. You will need to delete all the supplied linkages if they are not already rose jointed as well as adjustable balance links left & right sides this is critical otherwise you will never get good TB balance. 2. I...

Here's how you do it, its very simple and i can tell you what to get rid of or change.

Hi Ian, had a similar issue mine although ITB injection, bearing in mind mine has some miles on it (20,000.) so i didn't expect to find this. I noticed my Tacho was sticking at 2500 RPM but the car was running rough and on WOT it was missing. Because my Dizzy has both the crank & cam sensors in...

Hi Mitch Not sure if you got my message I may be able to help give me a call

Give me a call im in Brisvegas 0416200006 Mick

Its my RF not sure what the dash bulkhead looks like on a RCR? Ian's link shows the same units I used.

Hi Rod, They where the smallest units i could find back when I installed mine also seemed to be the most popular option for all the rally drivers. It went into my Roaring Forty perfectly and into the DRB just as well. I can send you one not sure how readily available they are.

Hi Dave I think i was first to install electric power steering I also fitted it to Pete McCluskeys DRB virtually a bolt in change over on mine & Pete's, used a Holden Barina / Opel Corsa column you can pick them up at at most auto wreckers for about $40.00. make sure you get the ECU and all the...

So ,changed the setting to the following Front toe .5mm+ Camber 1.5deg- Rear toe 1.5mm+ Camber 2.0deg-

Guys does anyone have a process / Methodology for front & rear wheel alignment settings for road use. Mick

Any body have the dwell settings for a Bosch MEC 726 ignition coil, googled it, called Bosch direct, called Motec no one has info. Need the correct dwell setting is everything always so hard has anybody had a tuner set one up? Mick

Thanks Rick, Wondering if anyone has a motec lamda tabel there using for a 302W

what not one reply ?