Search results

Send me an email with your contact details and I can connect you with an owner [email protected]

Looking for a pair of one piece SLC door windows. Send me a PM if you have a set you are not using and want to sell. Thanks

December 12th ride in Maine!

Sorry for the delay responding. Couple of pics of the exhaust exiting the bodywork. I still need to design and fabricate some king of trim ring. Any ideas/suggestions would be appreciated!

Couple pictures of how I did it - sorry for the poor quality these were all I could find. LS7 manifolds, corvette cats., DBX mufflers In the close up picture, you can see a heat shield over the top of the cats. The system is in 3 pieces, manifold/pipe/cat on the left and right are pieces 1&2 and...

Couple of pictures - on to the interior next....and a video: https://www.youtube.com/watch?v=ug6ZiVqnfyQ&feature=youtu.be

my $0.02, future access as Alex pointed out is important. Another thing to take into consideration is all other components. I made the mistake of mounting things on the firewall without the engine front assembly on/fuel inlet hose in place and I ended up moving things a couple of times...

One might expect that even a very basic review of any/all of Roberto's contributions to this forum, you would quickly realize - he IS the real deal. Even a non-car guy like me had that figured out pretty quickly..... :-)

send me an email [email protected]

See here: 1st Engine Start: SL-C LS3 eRod - YouTube I have LS7 exhaust manifolds to Corvette cats, to DBX mufflers. At the start of the video you can see where I mounted the cats. Since then, I have fabricated heat shields to protect the read deck fiberglass. The exhaust fabrication was...

I took the “guts” out of a BMW 5 series shark fin roof antenna and mounted a camera, powered FM antenna, satellite radio antenna and a navigation antenna inside. Measure the ground -to-camera height on a few production cars and then check out where that ends up on an SL-C when placed at the...

I am 2.5 years into my SL-C build. I discovered a pin hole in the radiator when I finally had the car running. I didn't want to fix it for a variety of reasons. When I inquired about purchasing a new radiator, RCR replaced it free of charge and I was back up and running with a beautiful new...

Grant, Love the idea, new font looks awesome and a bead would be the finishing touch. My vote would be no "-", but really either with or without is cool.

Thanks for posting that link to the episode - seriously cool stuff. I can just imagine the reactions when that rear clip opens up and people see what is inside!

Here is what I did. Prior to this, I had NO experience with car/engine wiring. I made it difficult on myself by thinking it was complicated. It just isn’t. It is deceptively easy – no cutting/soldering/extensions needed. The GM guys have made this as idiot proof as possible and all the...

Thanks for the compliments – creativity is often undetected plagiarism J Mike - console is simply a piece of aluminum I had bent into a “U” shape and covered in leather. The dash is the stock piece Fran supplies, I just reworked the “humps” to be a bit taller and extend down to meet the...

I was able to fit a double din unit in, but you will have to rework the dash to get it to fit. The 2 Vintage Air controls and a third switch for the 4 way valve is about the screen - just the stalks are showing as I haven't found any knobs I like yet. Trying to match the billet push button...

Re: My Exhaust system - LS7 manifolds, Corvette cats and DBX mufflers Here is a picture of the exhaust. 3" pipe connects the two mufflers with an oval section welded in to form the tailpipe. I am attempting to make a trim ring where this will exit the body, if/when I am successful I will...

My Exhaust system - LS7 manifolds, Corvette cats and DBX mufflers 1st Engine Start: SL-C LS3 eRod - YouTube

Hi, Interested in the surge tank if it is still available. Thanks, Peter 978-634-1155 [email protected]