Search results

Thank you so much! Your design is outstanding! It looks like tilton made the part!

You have no idea how much you've helped. I've been so stressed out about this!

WOW! That is EXACTLY what I needed to see! I NEVER would have thought of running the cable underneath. Thank you so much! I would love to see drawings if they are available. You made my day!

Does anyone have a photo of their superlite with an accelerator pedal cable rather than DBW?

I was thinking of running it through the front firewall where the radiator is then sweeping back with a large loop, then along the center spar and then up the front of the gas tank at an angle and then passing through the rear firewall at the height of the intake.

Thank you! Any chance that you have a picture of what you fabricated for the pedal?

Does anyone have any pictures of this being done?

I need advice on routing my throttle cable. I have an SBC and an Alien intake. I'm not able to get through to Nelson Racing Engines for advice. I've got the Tilton 600 pedal set. It seems like there's going to be a lot of bends and brackets to fabricate. Any help would be great!

Wow, I see you ran a carb too! How does it run compared to FI? My valve covers are already black anodized. I was thinking about drilling them and using an -8an fitting for a fuel tank that has teflon washers rather than weld. Do I really need a baffle? Thanks for your help by the way! Steve

I knew a mechanic about 45 minutes from my house who lived for these cars. A real old school Porsche mechanic. He was able to tune mine better than new. The cars were screamers! So fun to drive! Easy to work on too! I remember dropping the engine in about 45 minutes.

I have owned about 1(0) 914'6's Several that I converted from 4's and a couple factory. I even owned a 7000 original mile 914/6gt It was a BLAST! I owned two that had SBC's also. It was amazing how well the engine fit back there and that the car actually felt well balanced. They (sbc...

Hi Cam, Thank you so much for the response. I actually am running a custom SBC with an alien intake. I'm learning that I need to do a lot more research before taking any action. I never imagined I would have to drill my own valve covers for breathers (catch cans) or PCV's. I thought when...

I just figured that out. Ugh! Sorry!

I was watching some videos and the builder was talking about "steam ports" from the high point of either the radiator or his intake? I'm new to small blocks.

Thank you! I'm on it! What about steam ports for the intake?

Thank you! Why do they come without anything?

I know this is probably a dumb question... But, I don't have any breather ports on my valve covers. Do I need them? I'm running a SBC. I also don't know where/how to plumb the steam ports either? I've never worked on a SBC before so I'm really trying to understand the basics. Sorry for asking...

Hi Scott, I ended up writing him. He sent me a diagram for plumbing the pump. I still have questions, but he didn't really seem willing to help beyond the diagram. I'll do as much as I can and then get some pictures and post them on the forum. I'm sure someone can help. Thank you for...

My pump is integrated into my pan. I have a couple pictures of the side. I can try and get some shots from underneath too