cylinder

Hey Guys, Just wondering if anyone has any tips or troubleshooting guides for the speedmaster turnkey efi. I have the car fired up but it is running super rich and using the heat gun it seems that cylinders 1.3.5.6 are not firing. It also seems there is fuel getting into the cylinder and the...

I have read that its preferable to use AN4 size rigid tubing (with 1/4" ID)to the external slave clutch cylinder from the clutch MC on a ZF tansmission as it allows a better flow back and forth of fluid. But since I have a wilwood MC that has an output of 3/8" -24 which would appropriate for a...

Ken made a comment on another thread that got me to thinking and researching. As near as I can determine (and I might be wrong, so please someone tell me if I'm wrong): There are three master cylinders included with the SLC kit: two with 3/4" bore (stamped ".75" on the side) and one with...

Hi All, I have a 331 stroker engine with modified pro sport cyl heads 1.9 in 1.6 exh. Originally the engine was built with a 268XE cam from comp cams but this has now been changed to a 274XE cam from comp cams. Question is, are the cylinder heads, especially the inlet valve size suitable...