My brother in law, Tom, a car guy from way back, had the day free and joined me in the shop. It was the perfect opportunity to use his help in getting the interior tub in place. Most of the time I am in the shop by myself, so the tub is off limits.
I am using the Audi Shifter, which is mounted, so right of off the bat, the console had to be cut for the shifter assembly.
There were some markings on the tub from Superlite in the area of the foot box, so we trimmed to their lines, but more extensive foot box trimming, both in width and in length on the driver side, was needed.
I also mounted the hand brake to the left of the driver position, which had to be cut out. The floor area required cut outs for the seats and the sub woofer amp and wiring.
I have some boxing on the interior side of the firewall to accommodate my intake manifold, which required a cut out.
Finally, the console had further cut outs for the shift cables and some of the wiring I ran along the top of the console.
Next, I need to finish the tub along the door sills, which I don't know how to do, and along the firewall. It looks like I need to assemble the body to get the fit correct in these areas.