crossover exhaust question

[Clayton]

Thanks Brooke
Not knowing what angles I needed at the start, I ordered a selection of 30, 45, 60, 90 and 180 degs in 1 ¾”. But with a problem in the quality of the bends I ended up buying more from 3 different places $$$.
The finished system has 38 bends at various angles. For a start I would get 4 x 180’s and maybe 25 x 90’s if I was going to do the same system again.
As for the straight pipe, 3 odd metres.
The length of the pipes were in the 35-36” range. The longest being 2 and 6 and the shortest, 4 and 8.

Jim’s collectors can be found in the “How to Do” section under “Engine and Transaxle”
Hope this helps.

Thanks Denny Dera
It helps when you were brought up by a fitter and turner as an old man.
Big shoes to fill though.

[Brooke]

Clayton thanks for the inspiriation to build my own 180s.
They are for my Pantera.

[Clayton]

My pleasure Brooke, you’ve done a great job on the pipes.