Ken Roberts
Supporter
Here you can see that my rear hood mounts like the race car. I added rear mounted Aero Catches to the top rear of the hood. I added large shields on the sides of the transaxle to protect the axle boots from the heat of the exhaust. The back of the mufflers are actually held in place by arms attached to the rear cover of the transaxle.
The "horizontal" Ricardo shifter arm weighted cylinder was cut off , the arm shortened then re attached to clear the side of the muffler during shifts.
The "horizontal" Ricardo shifter arm weighted cylinder was cut off , the arm shortened then re attached to clear the side of the muffler during shifts.
Attachments
Last edited: