Canuk40's latest activity

  • C
    Canuk40 replied to the thread Rear Clip Support.
    No but with a dimension drawing on a napkin and the photo you could get a couple made at a local fab shop:) These are fitted to an RCR...
  • C
    Canuk40 replied to the thread CAV or RCR GT40 WHY?.
    You may want to look into buying a car already here and done car or a partially built or abandoned kit. Also it's worth mentioning that...
  • C
    Canuk40 replied to the thread RCR GT40 THROTTLE ISSUES....
    Hi Kim, It's easy to fall in love with these cars, as Lee said a beautiful car. The throttle pedal return spring I made from stainless...
  • C
    Canuk40 replied to the thread RCR GT40 THROTTLE ISSUES....
    Hi Kim, With the learning curve required to complete a car of this caliber, the support and knowledge base available from this forum...
    • RCR Pedal Box w Clock Spring.jpg
  • C
    Canuk40 replied to the thread RCR GT40 THROTTLE ISSUES....
    Hi Kim, a lot of good suggestions concerning the throttle linkage, levers and springs thus far. I'd really like to see a pic or two of...
  • C
    Canuk40 replied to the thread RCR GT40 THROTTLE ISSUES....
    Hi Kim, It would be helpful if you posted a few pics of the throttle hook up at the pedal box and the induction system to get a handle...
  • C
    Canuk40 replied to the thread cav starter.
    Hi Neville, no doubt you have gone through all the parts cross over guides and searched the part number online in your quest. What I...
  • C
    Canuk40 replied to the thread cav starter.
    Hi Neville, the solenoid is a common Bosch part. Take the starter to a local alternator/starter re builder. He'll have the part, install...
  • C
    About the brake bias, when they are properly bedded in and bias adjusted for optimum braking on smooth flat clean pavement you should...
Top