Search results

I spoke with Rick Chattell last evening (Australia time) to find out what was going on regarding this as it was all news to me. Rick contacted KCB and then phoned me back. We had not given KCB permissin to use any of our photographs on their web site and the potographs have been requested to...

Jim, Pat Barry's post of 1 March showing a picture with a rule in it is CORRECT. Hershal , I know, moves the spider and the front and rear clips round to get "the BEST FIT" and this can make every car vary slightly (up to 1/4"). The reason for this is that a very small movement in the spider...

I have had a long look at the reason that this order was incomplete and have looked at all our paperwork. The order was for an injection pump system but NOT our full 3 pump system. Simply to replace our standard carby system with an equilivent delivery system (similar price). I designed a two...

Jim, The 350 mm. is from the outside of the aluminium rear sill closure panel. The 30 mm. is the overhang from the chassis. Any more problems please contact us. Best wishes, Robert

Our MoTeC injection system is COMPLETE. By this I mean the system comes with the following : Inlet manifold with 8 throttles Injectors X 8 MoTeC M800 computer 3 pump fuel system fuel pressure regulator Throttle positioning sensor Air temp sensor Manifold press sensor Water temp sensor Full...

Re: Calling MDA Owners(poor souls) Mark, Off all the people on this forum I know how difficult this industry is and how the voice of few can make so much of a difference. The forum is very much a "double edged sword" and can be a great communication tool but can also allow people with agendas...

Dan, Noted. We will not send the fitting. Please let me know if you have any more problems. Best wishes, Robert

Jim, Sorry for the delay with this response. The components missing from your kit are the following. 1 x Three way valve. 1 x Low pressure pump. 3 x Rubber mounts for the low pressure pump mount. 1 x EFI Fuel Filter. All of these items are in stock at the moment and will be dispatched to...

Paul, The Gulf car has wheel arches fitted and this is the only car on our web pages that has these arches fitted. The blue car does not and in my opinion looks great and very well balanced. We have had 351 engines fitted but they are taller on the valley and this can cause problems with the...

Re: RF Delivery - I\'m exicted! Dear all, Yes we are quoting that thecars we are selling at the moment are those to be delivered in Feb / Mar 2006. The actual rate that we are producing our cars is TWO a month and not three a month as Ron said in his comments above (easy mistake and Ron...

Jim, Excellent work. That stainless steel takes no prisioners. I believe it takes anything up to TWICE as long to clad our cars with the stuff. They look good but all that work and so much sharpening of the drills !!!!! Good luck with the rest of the build. Robert

I found out last night that there are TWO original GT40's at the Historic Garage at the F1 and therefore our GT40 replica is not needed. Although I was very dissapointed not to get a drive on the circuit this year, I fully understand the reason behind it. I have had a great time withthe F1...

Hershal's comments were very true in that we (read my wife and I) were supporting all the US and UK kits. Our competitors were / are building kits in South Africa and the export grants and cost of labour in particular were making life very hard for us. I was left with the options of raising the...

Our new web site was released yesterday (1 Feb) and our new prices for both the USA and the UK are on that site. The specifications and options are also included. Roaring Forties are no longer offering the rolling chassis kit although those cars already delivered will get the FULL support they...

Well the cat did come out of the bag a little early as I hopped to set the release on 1 Feb. The short and sweet answer is that I have, over the last 8 months, been working with South Africa and in particular a 'young man' called Robbie Senekal in Cape Town. I was told many times about Robbie...

I have seen some of John's work first hand, his clocks, sill towels and everything is realy FIRST class. He delivers on budget and on time and I am happy to give him my highest support. Good luck with the venture, Chris will contact you when he gets back to work, Best wishes, Robert

Peter, I have arranged for a complete set of fittings for an injection fuel sysyem to be sent to you over the next few days. I hope they get to you before New Year. Seasons greenings and Best wishes, Robert

Re: A great big thank you www.GT40s.com Andre, Thank you for the big wraps but the real work was done by Ron Earp and still is done by him. In the begining Hershal was a LARGE user of the Cobra forums and we talked often about the fact that we needed a DEDICATED FORUM JUST FOR THE GT40's...

Well therices are out !! The cost of a complete Ring and Pinion (including pinion shaft) is US$ 1800 a set and this is if I order TEN. They are not cheap but this is at MY price and does not allow for R&D that I have had to do. I will be ordering a couple for myself so another 8 needed...

Et all, I have just got back from a specialist manufacturer with a TEN axis machining center. They have agreed to build me new diff ratios for the Audi OI6 5 speed box so many of us use. The final drive will go to 3.11 : 1 and this is an improvement of about 20% on the original ratios. This...