Search results

Thanks for sharing these interesting dawings.

Thanks to RWoerz for sharing the blueprints of the gear shift. One of the drawings made me wonder, did the shift nob always have a GT badge on the top? It not on the blueprint, but I have an original photo where you can clearly see the badge. Does anybody know how many cars were build with this...

During my search for parts for my GT40P/1000 reconstruction, I brought among other original GT parts, some Gt40 prototype wire wheels from a former Comstock team member. I was offered 4 Boranni painted wire wheels which he claimed came from either GT/103 or GT/104. This is what the seller wrote...

Hi Rune. The original spec sheet from JW engineering says caster on the rear should be 7-8½ deg adjusted to give min toe-in for each wheel.

I thought that this rare image of Gt40P1000 testing at Sebring in March 1966 might interest the Members on this Forum. The picture is shot before FAV delivered the Car to the Comstock race team

Hello, I am a new member and I will like to introduce myself. I’m a Danish car nut and historic racer. In my mid-twenties, I brought an original AC Cobra in the UK for the princely sum £9500. After buying the car I decided to have the steering wheel mowed from the right to the left side, and I...

Hi Andrew . Apologizes for showing your artwork. I did not intend to help anybody ripping you off. Just trying as a new member to be helpful.

I took a photo from the backside. It looks like the letters are engraved into the plastic and the different colors are painted in layers afterward. I also include a photo of the seatbelt, of sub belt arrangement for Cameron. Both belts are attached to the same place in the chassis with a bracket...

I measured the center cap. Outside diameter is 65mm and inner diameter (see picture) is 60 mm. Total thickness is 7 mm and the thickness of the outer diameter is 4mm. I eclose a couple of pictures.

I don't know if these images will help, I did them when iÍ had to have a cloth patch for my racing suit made. I produced it in Photoshop, and I remember I found a font that was close, but I had to reshape the letters a bit to make it look right. I would have uploaded the Psd file, but the system...