Search results

I have all the looms for the electrical wiring and a diagram from JWA , but I hoped that someone out there have some pictures from the installation of the cables . If can install the cable bundles correct , it is easier to figure out where the cables have to go. I was promised a list that...

I have The JW Automotive Electrical Wiring Diagram and it has lots of numbers on the wires, I have the looms but only with the correct colour on each wire no numbers . Does someone have a list telling witch number connect to a colour? I can connect all together working correct but I would...

Thanks for the explain of this. Rune

It seems to be this ones both of them . I will follow this. But I do not understand differential ratio. Can some of you explain that for me ? Rune

I will try this instruction ,but it was some info on the pickup also, I have to look everywhere some more times before I do the calibration . For now the speedo just go to fast so it is a minor problem. But I want it correct. Rune

Yes it seems to be this one, but there is more pages I believe. I have not seen the instruction for 4 years so I cannot really remember all. If you have it all scanned, is it then possible for you to send it on mail to [email protected]. Rune

I can not find my manual for calibration of my electronic speedometer from smiths. Does someone have this manual or a link to one on the net , and can supply me with one? I changed tyres and need to calibrate. Rune

Sorry Ron , will try to put in correct subforum. I thought that on theese brakes lowest temp was rhe best.

I have been study pictures from the duct hose used for cooling the brakes on original gt40's , and it seems that there are used more than one diameter on this . Could that be a correct observation or is the pictures lying. Someone know what is the correct one? Rune

I solved the problem by open up to 5/8" holes on the rotor hat and then the rotor hat and the wheel moved in 1/4" and I'm happy with the result. Rune

Jac mac I take that one. I know that I might introduce a coming problem. I might better make them in one piece, or use some epoxy and rivets. Except for that, do you see some other challenges? Rune

The spacer is made from aluminum and are 0.250" thick. Rune

I made spacers to fit inside the rotor hat on my brakes only for a better fit to the 6 taps . Someone told me then that this is dangerous , could that be so ? I can not see the problem but maybe some of you with more experience know better. I do not want to go for this if there can be problems

Define original,that is from the 134 cars made in the 60's, not reproduction made after by Gelscoe or others . Rune.

Was all the GT40's on Goodwood 2013 original cars ?

Hei . før du kjøper gt40 bør du få klarlagt om du får skilt på den, selv om den er med title fra 60 årene så lar ikke tilsynet seg lure lengre. Se på de nye reglene om å bygge bilen selv , muligens en brukbar løsning for oss i Norge Rune