Search results

Finaly my cooling water tank is welded and ready for innstall

Finally my fuel tanks are completed I made them in stainless steel Total volume is approx 15 Gal . Enough for me , if bigger tanks is needed I can make them 7Gal. bigger/longer. Now it is only to fill up with the yellow race foam and install in car

Just realize that I have one more monocoque in parts, one can call it a sub assembly some parts is spotwelded together . I thought it could be nice to have a spare chassis when I made the first one(made double), but it seems that I'm to old to start on a new car, so I think it must find a new...

I'm installing the Stevart Warner original fuelpumps, and wonder what treads there are for innlet and outlet fuel ? It seams that NPT can work, but BSPs seems to be closer someone out there know what to use? . Rune

Nei jeg er ikke ferdig, men jeg bygger i tett kontakt med biltilsynet og de er fornøyd så langt. Rune

Sorry for using Norwegian here :) Hei undersøk om du kan få registrert den som kit car, det betyr at du må demontere alt og bygge opp igjen på ny etter de nye reglene om selvbygging av bil. Send meg en melding hvis du er interessert. Rune.

I took a piece of the original fabric and held it over a flame , and yes it melted easy . Rune

Hi I made my seats according to original plans and made from nylon fabric also used in parachutes The weight is 7,25oz/yd You find the fabric out where they sell parachute equipment. And the brass grommets are #4 1/2" hole OD 0.95" Tread used is Nylon #69 (size E ) T1012 You can see my...

Then next stage on building my own seats is completed. hard to follow the drawings here but came out good.

A question here how does this foam react if the gap is less than 11/4" does it expand to fill all gap and then stay like so? if not one can have problem if door is left open for a while. Rune.

I think that I have to ask the painter if he have a good idea for doing this , because I'm afraid of getting colour diff between the vinyl and the car . I just have to figure out the cize of the decal. But it is still months away so I think it will be well sorted out until then :) Rune

I think of paint my car in this colour but have some problem to find out how to make the big 'gulf decal in front. I think it have to be painted on as a build layer for layer . Someone have a good idea ? Rune

First stage on seat production completed, I have ordered the fabric and grommets for the seats , and it will arrive me in August. I have also made the side rubber for the seats so it look good. Rune

Hand brake.

I'm not making for sale for the moment, I just want to make for my car , I also made my own handbrake system and are doing the seats . If you are going to make your own car it have to be real. Rune

I have been doing some work almost every day but it take time I just found that if I wanted a original steering wheel I had to go into the drawings and made it from scratch and so I did , with some help from Sweden with the laser cut aluminum. So this steering wheel is from the original...

I have no problem that this tread was moved. I know that I never should open a zip from unknown, but my computer is also used by others in my family, so it could come in that way. The company that restored my computer wanted to pay (for their own money) just to see if it was possible to get it...

I will just warn you all for a virus called "CTB locker"(take a moment to google this and see what it do), it crypted all my files on my computer including everything I had regarding gt40. I had everything a back up disk connected if my computer crashed, but I did not see this comming, so for...

Thanks, this was the post I was looking for I might change from standard Gulf to the one with Guardsman blue and marigold on my mono. Rune

This tread was not only for the originals, it was for all GT40 with pict of the car and the codes on the paint. I think the article started with a blue? gt40 outside a garage in winter time lots of snow. if I remember right.