Search results

Bryan, Sent you an e-mail.My e-mail is still the same. Dave

John, I don't know if you found your parts or not but you can try www.rockauto.com in the US. Look under 83 or 84 Audi. They still stocked seals and clutches with bearing. They also show a picture of the part with part number. you will be able to see what they have in stock. They will even...

Hi guys, Soon to be back working on the car. Bought a house with a great big shop at the back in Northern Ontario on Georgian Bay. Will be moving in mid Nov. All my junk will be there instead of in storage. Will keep you updated when start happening. Dave

I'm still kicking and hope to start the car again when I'm done with the lawyers and get my dad sorted out too. Dave

Keith, Nice guitar eighties lawsuit with bolt on neck gotoh tuners but on the low end. I have a Yamaha SL450 from 84 from the same era set neck and a little over 10 lbs just as good as a gibson. Dave

The B16 is smaller and lower. Dave

On the brace in the second picture a threaded piece or bolt goes through to which a second spherical joint attaches. It mounted on a curved tube piece attached to middle of the door. A small tube at the end of the bend holds the spherical joint. The tube is 90 Deg to the bend. I hope this helps...

Mike, Here is a picture of the outer hindge .025" threaded spherical joint with locknut mounted in a plate. An eye mounted in the roof attached to the window support hoop glassed into the upper window opening. There are two braces welded on to this hoop and glassed into the cockpit section for...

Mike, I have been working on my home to get it ready for sale. I am going to look for some property outside the greater toronto area where I can get some property with a shop and go at this full time. Roger Andreason has taken back Chevron Cars LTD from Chris Smith and sent me an e-mail to see...

Hi guy's, I'm still here. I have not done much work on the car. Pulley's are cut for the engine and crank pulley machine but has to be broached for the woodrift key. I've had lot's going on that cuts into my build. My mother passed away on Friday, but she's in better place, Alzheimers...

Don't forget you were with us too at Juno after the war to end all wars, 25 years later. Anniversary talks | Australian War Memorial Dave

How about HS-478 the instruments look dated late 60's early 70's and it's a twin and it's British. I was originaly thinking early Shorts Skyvan but the yolk's throwing me off. Dave

I'm taking a guess. Bristol Freighter

David, You got it. CF-101 here F-101 US (Voodoo) McDonnell CF-101 Voodoo - Wikipedia, the free encyclopedia

Guy's, It's American and we flew them, CF100 no after that. Mike it was made in your area.

Heres One.

David, Remind's me when 9/11 was happening, all international flights to the US were redirected, Yellowknife to Gander lookeded like aircraft parking lots. At least the ground wasn't shaking here then. The logistics involved in redirecting so many aircraft baffles me. Dave

Henrich, I will be waiting for your pic's. Dave

Heinrich, You are too ridged with the glass. Too much run solid U-channel on top. The glass has to float in the guides. With the softer bailey at the top it gives some play in the glass. You could also change the nylon wheels on the scissor regulator to spherical joints so the glass floats in...

David, My current cache is is 2 bottles of "The Glenlivet" and one "Glenfiddich". I had a bottle of the "Dalmore Cigar Malt" which lasted many years bought at the B21 in Florida. Looking at the price of it now, I wish I had bought two or three bottles. The reason for no hangover in Scotch is...