fitting

I'm converting my SLC brake system to ABS so I need to have all the brake lines plumbed on the outside (like the newer cars). I can't find a source for the steel bulkhead fittings that convert from 3AN to 3/8" inverted flare for 3/16" brake tubing. I'm pointing to the exact fitting I need.

-SOLD- Fuel Tank Pickup tubes These are two spare fuel tank pickups with gasket that came with my RCR GT-40. An AN8 bulkhead fitting, tip over valve, or vent fitting can be used in the spare hole. $20 for both plus shipping from Colorado.

I have a non-inverted 930. At the top towards the front of the unit there is a swivel fitting that vents fluid. The fititng does not connect to anything, it just sits exposed there pointed rearwards. Any time it's really hot outside, driven hard or on the dyno the vent fitting pukes fluid...

I'm trying to plumb the oil temp sensor of a SPF into my oil line. The coolant and oil temp sensors are mechanical. Looks like the coolant temp sensor will plug into a boss on the intake manifold so that should be solved (yet to try it). I was planning on putting in a -12AN T fitting into the...