Shaun
Supporter
Hi
Ok air con time now and have most of it figured out but any guidance would be helpful, so in the SGT kit I have 3 pipe sizes which I will call Small / Medium / Large in my summary below, this is I think what the pipe route plus my questions
Compressor outlet marked S Large pipe
To
Service port black small cap
To
Heater box top pipe
To
Heater box bottom pipe
To
Capillary Valve output is Small pipe
To
Is this where the other service valve with the small brown cap marked H goes??
To
Drier In - is this correct i.e is in the in or the out?
To
Drier out
To
Radiator bottom inlet
To
Radiator top outlet small pipe
To
Compressor outlet marked O Med pipe - This is where I am most confused, I only have one fitting which is medium so how can I ever transition from small or large to medium??
Any guidance as always appreciated
Shaun
Ok air con time now and have most of it figured out but any guidance would be helpful, so in the SGT kit I have 3 pipe sizes which I will call Small / Medium / Large in my summary below, this is I think what the pipe route plus my questions
Compressor outlet marked S Large pipe
To
Service port black small cap
To
Heater box top pipe
To
Heater box bottom pipe
To
Capillary Valve output is Small pipe
To
Is this where the other service valve with the small brown cap marked H goes??
To
Drier In - is this correct i.e is in the in or the out?
To
Drier out
To
Radiator bottom inlet
To
Radiator top outlet small pipe
To
Compressor outlet marked O Med pipe - This is where I am most confused, I only have one fitting which is medium so how can I ever transition from small or large to medium??
Any guidance as always appreciated
Shaun
