Ford GT Mark I/II Nose - Complete front body panel w/o hood insert. This is not a cheap kit car outer skin.
Full bonded inner paneling and duct work for brake cooling and air inlets to interior, with head/driving light boxes and covers. Tilt/Hinge plates installed to mount on pivot pins/studs that can be adapted to frontmost corners of the monocoque's nose subframe (eliminates having to slide nose forward off of mount pins and set on ground - with monocoque set to 4 to 4 1/2 inch ground clearance nose will pivot forward without hitting the ground if a retainer cable is used).
No visible body damage to fiberglass but will require repaint.
Newer CIBIE headlights w/bulbs installed - Lucas signal indicators mounted, with full lighting harness.
Driving lights (inexpensive aftermarket units) may have to be adjusted and/or remounted
Head and driving light Lexan covers fitted and mounted (one is cracked but will make a good pattern)
Center radiator cooling air inlet has mesh screen installed, might not be included, but if it is will have to be flattened as it's a bit wavy now.
Local pick-up, or will deliver within 500 miles of Detroit for $450 plus expenses, or you can arrange your own shipping.
Motivated to sell, if it brings $4,500, I will include 2 original Marchal GT40 driving lights that are complete with full housings, lenses, bulbs, wiring and mountings, with their original boxes.
Please send any inquiries via Private Message as I DO NOT regularly monitor this site. If you post a question or inquiry here I may not see it before an extended amount of time has passed. Thanks.
Stock Photos of Lights
Full bonded inner paneling and duct work for brake cooling and air inlets to interior, with head/driving light boxes and covers. Tilt/Hinge plates installed to mount on pivot pins/studs that can be adapted to frontmost corners of the monocoque's nose subframe (eliminates having to slide nose forward off of mount pins and set on ground - with monocoque set to 4 to 4 1/2 inch ground clearance nose will pivot forward without hitting the ground if a retainer cable is used).
No visible body damage to fiberglass but will require repaint.
Newer CIBIE headlights w/bulbs installed - Lucas signal indicators mounted, with full lighting harness.
Driving lights (inexpensive aftermarket units) may have to be adjusted and/or remounted
Head and driving light Lexan covers fitted and mounted (one is cracked but will make a good pattern)
Center radiator cooling air inlet has mesh screen installed, might not be included, but if it is will have to be flattened as it's a bit wavy now.
Local pick-up, or will deliver within 500 miles of Detroit for $450 plus expenses, or you can arrange your own shipping.
Motivated to sell, if it brings $4,500, I will include 2 original Marchal GT40 driving lights that are complete with full housings, lenses, bulbs, wiring and mountings, with their original boxes.
Please send any inquiries via Private Message as I DO NOT regularly monitor this site. If you post a question or inquiry here I may not see it before an extended amount of time has passed. Thanks.
Stock Photos of Lights
Attachments
-
$_57.jpg227.4 KB · Views: 533
-
$_573V1LN6MH.jpg267.3 KB · Views: 458
-
$_5736A357AS.jpg267.9 KB · Views: 380
-
$_570Z7MS5D6.jpg212.5 KB · Views: 357
-
$_57K30Z1WLL.jpg185.7 KB · Views: 367
-
$_57b.jpg161.7 KB · Views: 356
-
$_57c.jpg127.2 KB · Views: 390
-
$_57d.jpg107 KB · Views: 432
-
$_57f.jpg105.2 KB · Views: 467
-
$_57e.jpg260.6 KB · Views: 500
-
$_57g.jpg80.4 KB · Views: 375