Gurney Eagle Valve Covers

#1
Gurney Eagle valve covers cast in Aluminium and to fit Ford 289, 302 and 351W cylinder heads along with any other with the same bolt pattern.
Eagle heads were fitted to perhaps the most well known Ford GT40, Gulf car 1075.
The cost is £295 per pair and they are supplied fully machined with all fixings.
Designed to accept push in type oil fillers and breathers or can be drilled and tapped for screw in fittings.
For further information email [email protected] or telephone 01562 820372.
Thanks

Andy
 

Attachments

#8
latest batch has just arrived and are now available for immeadiate delivery.

I have a feeling this may be the last batch we ever produce due to the time and hassle involved so if you need a set for a future project now is the time to order.

Most are already pre sold.

Thanks

Andy
 
#11
Along with the Gurney Eagle covers we have now re introduced the Gurney Weslake covers.

The covers are designed to fit any Small Block Ford head that has a standard Ford fixing pattern.

Limited amounts of both covers are now available for dispatch from stock.

We can supply covers with oil filler and breather cap holes pre cut in covers at customers request in the required positions.

Holes are 1 1/16" diameter suitable for most push in fittings using a rubber grommet allowing the use of a flush fit oil cap needed for clearance in GT40 replicas.

All covers are supplied with a fixings pack.

Thanks

Andy
 

Attachments

#13
Another batch of covers have just been completed.

Most are pre sold but there are a few sets still available so if you need a set be quick.

Not sure when another batch will be available.

Thanks

Andy
 
#15
Another batch of both Gurney Eagle and Gurney Weslake covers have arrived today.

If you need a pair of either just let me know ASAP as they sell out quick once they arrive and there will be a delay until the next batch arrives.

Thanks

Andy
 

NickF

Lifetime Premier Supporter
#16
Another batch of both Gurney Eagle and Gurney Weslake covers have arrived today.

If you need a pair of either just let me know ASAP as they sell out quick once they arrive and there will be a delay until the next batch arrives.

Thanks

Andy
Andy do you have a set left? Will they for FAR heads on a 351W? Do you have black with polished fins? What is the cost shipping to WI 53066?
 
Top