Latest activity

To pass IVA and get a registration number and legally drive on the road all 'screens' must meet a standard and be marked accordingly. As...

Good morning Douglas and Devin, I used a HB body epoxy 989 to seal it, then HB body high build primer 534 and finally used 2k satin...

Hi Douglas, a few pics of the process we used on my RH dash. I hope the pics help. Cheers, Adrian

Hi Max, The photo ( circa 2006) shows the fabricated steel upright part of the Four Corner Upgrade Kit produced by CAV Canada...

Thanks Steve for being a second set of eyes... Yes...nuts will be fitted instead of spinners ( borrowed from AK ) Labels fitted at bias...

Thanks Jerry, I thought I'd watched all your videos on YouTube so don't know how I missed that one. I'm going to use time and current...

have a look at post number 30 above Sorry, just checked and i used A8 Calipers... Rear Left Electric Brake Caliper w/ motor For Audi A8...

As long as you know your chassis ride height, and your car has been aligned, you can check your bump steer. Get your car aligned before...

Curious, where are your side windows?

Hi to you all, The uprights look very similar to the ones supplied by Ian Clark of CAV Motorsport. Don't know whether he still supplies...

I scanned the dash opening, but the scan was wildly inaccurate. Bought a new rear camera screen and display. I had to 3d print a base...

Hi Chris... some figures that may help you on electric brake install... I inserted a 0.47 ohm in the connection for brake on ( seperate...

Mould produced of scanned original side window. €300. Location Germany. Correct spec Side window hardware (Alu or acrylic version) also...

Hah! Seen his stuff before- dry, but funny and smart, and yes, a little NSFW. Mixed thoroughly, and it's a very entertaining recipe...

It would be good practice to put a hard stop at the pedal end regardless. I usually depress clutch pedal to the clutch release point...