Rod Dittmar
Supporter
I'm having a little trouble understanding exactly how this shifter works. Namely how to get it in reverse gear. I was assuming that, because the shifter shaft seems to be spring loaded, it would need to be pushed down and then pulled back so that the pin on the shaft would clear the boss on the shifter housing (see pics attached). However, that doesn't appear to be the case with mine because the shaft isn't able to be pushed down. I either have 1st through 5th gears with no reverse, or I can adjust the cable at the ZF and get reverse along with 1st through 3rd, but no 4th or 5th. Hoping for some help from someone who has a functional one of these. I'm going to post this also on the RCR forum with the hope that Fran might see it and respond.
TIA, Rod
TIA, Rod