Search results

  1. C

    Intermittent stalling

    I would re-torque your intake manifold bolts. I believe they are 89 inch. pounds. When the engine heats up a small leak can occur that can cause your symptoms. The leak may be small enough to not throw a code.
  2. C

    SLC-Stealth Lambo Crusher

    Thank you Del. You guys are amazing. I ordered it through Amazon. I can't wait to get back on the road. A fifteen dollar part takes out a $100K car.
  3. C

    SLC-Stealth Lambo Crusher

    Well I have 900 miles and 3 track days on my SLC and finally had my first failure. Yesterday as I was walking out to my car to go home I noticed my brake lights had been stuck on all day. It dragged my battery voltage down so low I couldn't even jump start it. Has anyone had this problem? I...
  4. C

    Ricardo Gearbox platform support

    Hi Scott. Are they rebuilt or new? Do they have the upgraded axle bolts? Do they have the stock gears? What about price?
  5. C

    Overflow tank

    This is a moroso expansion tank and the overflow tank is behind it. Cheap and easy. I have over 850 miles and 3 track days with this setup. No issues and no overheating.
  6. C

    Setup for top speed run?

    Thanks everyone for comments and advise. Frank, do you remember your camber and toe in settings?
  7. C

    Setup for top speed run?

    Thanks Howard. I'll post more info. when I get it. I measure ride ht. in the same places just in metric. Neil, that is my biggest concern and is why I am seeking information. Tom, sorry for the misinformation, some days I spell my name wrong. I am a big fan of the Ford GT. I have seen a few...
  8. C

    Setup for top speed run?

    Hi Howard. The East track at Wild Horse Pass is small. Max speed is 120MPH and just for a second before hard braking. Ride Ht.: Front is 89mm. Rear is 115mm Stock Caster setting, which I think is 4.5 Camber: Front = 1.7 Rear = 1.1 Toe in: Front and rear is just below 1mm Springs: Rear = 8"...
  9. C

    Sl-C or a finished car?

    At a typical car show there are brand new production vehicles of all types: Corvettes, Mustangs, Camaros, Challengers, Lambos, Porsches... All of those are nice vehicles. When I show up with my SLC there is a crowd around my car all night long. Anyone can buy a vehicle, not many can build one...
  10. C

    SLC-Stealth Lambo Crusher

    My "top speed run" post was supposed to be attached to my main post so I am bumping me up front so people know my parameters. I there a way to merge to two? I'm still hoping to find some setup help for a top speed run.
  11. C

    Setup for top speed run?

    Hi John, I have the Ford Ricardo transaxle so the final drive ratio is 3.36. 1st = 2.6, 2nd = 1.7, 3rd = 1.2, 4th = .9, 5th = .7, 6th = .6. No traction control or ABS. The rear track tires are 345 Hoosier R7 slicks. The fronts are 285. Engine is around 600HP.
  12. C

    Setup for top speed run?

    Well, I have completed three road course track days. The SLC is amazing. Passing brand new corvettes and Porsches is pretty awesome. Now, I want to try a high speed run. There is an event coming up called "No Fly Zone Arizona" on December 12. It is a 1/2 mile run at an airfield in Gila Bend...
  13. C

    SLC-Stealth Lambo Crusher

    Hi Neil. I am in full panic mode while driving so I don't see anything but the immediate track and traffic in front of me. I am still learning to glance at my gauges during the straights. My instructor would yell at me almost every lap because looking at the gauges requires to break driving...
  14. C

    SLC-Stealth Lambo Crusher

    Thanks Cody. Track time is way different than our test ride. The video looks like I am casually driving but believe me I am pushing it. The video link below is the first segment.
  15. C

    SLC-Stealth Lambo Crusher

    Here is the pic of steering box.
  16. C

    SLC-Stealth Lambo Crusher

    This is my second track day out with the SLC. After going off coarse at :45 seconds, every time I turn right I get this ticking sound. It is very evident at 2:07 and 2:15. When I shake the right side steering arm can I can hear some movement inside the main gold colored steering tube. The...
  17. C

    Ticking sound while turning right

    On the left side of the hex there is an stamped indentation and then on the left side of the rim there is 3 stamped indentations. I just thought that was some kind of adjustment. I put a 14mm wrench on it and moved it CW and CCW a few millimeters but then got nervous so I stopped. I have no...
  18. C

    Ticking sound while turning right

    Well I finally got my SLC on the track. Super amazing car. On day two my right side wheels got off course and ever since that happened every time I turn right I hear a ticking sound. When I shake the right side steering arm can I can hear some movement inside the main bronze colored steering...
  19. C

    Del's Build: SLC IR/8

    Good Morning Del. I noticed you deleted your windshield wiper stalk. Is that a functional knob in its place? If so, how did you do that. Where did you get that knob?
  20. C

    What's It Like At The Gas Station?

    It takes me an extra 20 minutes just to answer questions after fueling. So far the majority of the people call it a Mclaren, 2nd is lotus. Some people say it looks like the Batmobile, incidentally, that was never my intentions. I don't mind the attention but repeating the same thing over and...
Back
Top