steering

http://www.gt40zone.com/2nd_steering_wheel.mov

I have a 2006 CAV and wondering if anyone knows where to get a nice black steering wheel with raw aluminum center pc that will fit?

I connected my steering linkages tonight and for some reason I can turn way right and barely left. I have the tie rod ends as far as they can go in on the right side and out on the left side, but it doesn’t help. It seems as if it’s somehow too far right. I used the rack that I...

In putting my steering rack together I decided to check on the ideal placement of the u-joints on the intermediate steering shaft. On end goes to the rack the other to the steering column. What I found are two contradictory schools of thought. The one says: STEERING U-JOINT INSTALLATION...

After 16 years, it looks like the outer bushing on my steering rack has gone to pieces. Has anyone replaced the seal/bushing and/or know where I can locate a replacement? Unfortunately, I don't know the source of the rack and perhaps another forum member might recognize it. The location of the...

I am using the Summit Raptor Pro to provide much of the switching via the steering wheel. I need to have the inputs to the Master cell be ground based. I know I saw it somewhere, but can anyone point me to the wiring needed to convert the wires that normally attach to the GM steering column into...

I finally got around to test fitting the dash, Koso gauge and steering wheel. With the seat in the most rearward position and flat on the floor and the steering wheel positioned comfortably, I can’t see the Koso gauge through the top half of the steering wheel. Lowering the steering wheel...

During our initial wrench-turning on P/2334, we noticed a significant amount of toe in. It will be a while before alignment, but we wanted to make some small adjustments to toe, just to make the chassis easier to roll around the shop during drivetrain installation. As we started to turn the...