Graziano installation

[Alex]

Hi all,

I finally found my gearbox (graziano) and was looking at the installation on the car. I believe I am missing some hardware (rod and bracket for the rear mount, spacer for the front to the motor mount).
It also looks like I have interferences with the rear clam (diffuser and also hinge bracket.
Does anybody have pictures of the installation in the car? I did some research but was not successful (maybe I missed?)

Thank you

Alex

 

[Joel K]

Alex,

I have a bunch of pics documenting the physical install of the Graz in my build thread. Here are the posts #s…

Transaxle install - Post #400, #402, #449, #518

Also Kurtis documented the install with a bunch of very important part numbers and install guide…This is a must have…

Dropbox

www.dropbox.com

 

[Brian Kissel]

WOW, Thanks for that Joel. There is a lot of information there. It appears that I missed Kurtis's document as well. I have now all of that saved.

THANKS for posting !!!!!!!!!!!!!!!

Regards Brian

 

[Randy V]

If someone wants to upload it here, it could be made available should there be a problem with DropBox.

 

[Alex]

thank you Joel, I will check it out. sometime it's really hard to find something with the search function

 

[Alex]

I also missed Kurtis document, perfect.
The only thing I don't see it the installation with the street rear clam, as you have the race one

 

[Alex]

Anybody has pictures of the street rear clam with a Graziano to see the cut out? Also the rear hinges bracket need to be cut it looks like

 

[Mark B.]

This isn't a great picture, but it's the best one I could find of my graz cutout before I changed the mount. On mine, I was able to use the factory hinge bracket without cutting. It sat maybe 1/2" below the gearbox.

 

[Alex]

This isn't a great picture, but it's the best one I could find of my graz cutout before I changed the mount. On mine, I was able to use the factory hinge bracket without cutting. It sat maybe 1/2" below the gearbox.
View attachment 151873

thanks Mark, that's a good start! it always scary to start cutting in the fiberglass lol. At least I have an idea .
If someone else have pictures, i will take them lol

 

[Frank Clark]

Anybody has pictures of the street rear clam with a Graziano to see the cut out? Also the rear hinges bracket need to be cut it looks like

The easy way out...