Headlight cover bolt size?

[joe]

Anyone have any info on the size of bolts/screws typically used for the headlight covers? I'm looking at installing threaded nuts into the fiberglass and then bolting the covers down.

https://www.amazon.com/PATIKIL-Self-Tapping-Threaded-Inserts-Stainless/dp/B0DHZF6ZXF/ref=sr_1_11?crid=3RF8WR5IG1A8P&dib=eyJ2IjoiMSJ9.KNr3_D3KJHFp8jOovIIalTsqR8s_QpWK1vHhb4ghQjjd4jwnWItUiMHByKdlBpteRoVlSwc567zpaG92v3JlyAMzM1xrbnLlFfo5048rcV5OM9JJo3h88lNCz5vLRczey1ZfJkJmm8sG93ZkVboHtlLuOwuzC4IJpRhpA8OWI8gucyTkmiCwGSUIv7YzRDv8hHPm76lBaKg8XZnu53prOpldYPNpNKFU6_6UcmTB1cI.JHk57YArZJpI6eJNwKthQraugbIURP6hK30oNXSWLjw&dib_tag=se&keywords=stainless%2BSelf%2BTapping%2BNut&qid=1781643561&sprefix=stainless%2Bself%2Btapping%2Bnut%2B%2Caps%2C173&sr=8-11&th=1

 

[Lee Patterson]

SPF uses a small stainless screw. Don't know the size. Not sure you need bolts for these. They are super lightweight pieces.

 

[joe]

Mine are probably going on and off during fitting and bodywork more that a Superformance car. I don’t want to rely on the fiberglass holding up to screws.

 

[Jerry Irwin]

Mine are probably going on and off during fitting and bodywork more that a Superformance car. I don’t want to rely on the fiberglass holding up to screws.

i used these for my gt40 lens and will be using them for side screens
( Thread Adapter Fitting Reducer Threaded Inserts )

m4 inner, m6 outer length 8 mm

Thread Adapter Fitting Reducer Threaded Inserts M4-M20 To M2-M12 Male To Female | eBay UK​

M12 1.75mm. Male-Female Threaded Round Adapter. Coarse thread Thread pitch. Superb finish, smooth with no burrs, quick and easy application. P a ckage Including.
www.ebay.co.uk

i locked thm in place with thread lock

Jerry

 

[Adrian Starling]

i used these for my gt40 lens and will be using them for side screens
( Thread Adapter Fitting Reducer Threaded Inserts )

m4 inner, m6 outer length 8 mm

Thread Adapter Fitting Reducer Threaded Inserts M4-M20 To M2-M12 Male To Female | eBay UK​

M12 1.75mm. Male-Female Threaded Round Adapter. Coarse thread Thread pitch. Superb finish, smooth with no burrs, quick and easy application. P a ckage Including.
www.ebay.co.uk

i locked thm in place with thread lock

Jerry

Thanks Jerry, what screws did you use. Many thanks, Adrian

 

[Walter]

i used these for my gt40 lens and will be using them for side screens
( Thread Adapter Fitting Reducer Threaded Inserts )

m4 inner, m6 outer length 8 mm

Thread Adapter Fitting Reducer Threaded Inserts M4-M20 To M2-M12 Male To Female | eBay UK​

M12 1.75mm. Male-Female Threaded Round Adapter. Coarse thread Thread pitch. Superb finish, smooth with no burrs, quick and easy application. P a ckage Including.
www.ebay.co.uk

i locked thm in place with thread lock

Jerry

indeed, this is the way to go on the fibreglass end. Use m4 aluminium (aluminum if in the US ;-)) countersunk anodised Allen head screws. For the Lexan part: taper the bore holes with a suitable drill bit, wood bits will do for boring the straight sections...